After repeatedly experiencing and testing the handle, seat and helmet, the laboratory staff began to reverse disassemble the products of Fengqi Amusement Equipment Factory at Paul's request.

In order to figure out the technical principles of Fengqi Amusement Equipment Factory, the laboratory staff decided to dismantle the game controller first, from simple to difficult, and then dismantle the seat and helmet after the game controller is solved.

The laboratory staff carefully placed the game controller on the workbench in front of them. After thinking for a while, they cleared the anti-tampering strips around the game controller bit by bit... Of course, this also means that they gave up the after-sales service of the controller.

After clearing the anti-tampering strip, the experimenter couldn't help but widen his eyes when the anti-tampering strip was removed.

Are you making a mistake? There are no screws at all!

Not only is there no screws, but there is not even a bayonet! The entire handle shell is integrated and it is impossible to be opened!

"Impossible? How do you install circuit boards, buttons, etc.? Overall plastic sealing technology?" The experimenter was completely stunned.

In order to figure out the internal structure of the handle so as not to damage the circuit board inside the handle when the small chainsaw is forcibly dismantled, causing technical damage, the experimenters brought a very advanced three-dimensional detector. They wanted to find out the internal structure of the handle, and then decided to use the chainsaw to break the shell.

Unfortunately, the powerful three-dimensional detector can even detect cracks inside metal, but it cannot detect the internal structure of the handle. The experimenters later tried various detection methods such as ultrasonic detection, ray detection, and magnetic field detection, but still could not detect any structural information in the handle.

The only thing that can be done now is to forcefully break it down, dismantle its shell, and check the structure inside the handle.

After reporting the previous situation to Paul and asking for instructions, the experimental personnel began the process of forcibly demolishing. While demolishing, they used live video to Paul. Irving, who was still staying in China, and some important senior HNC personnel.

‘Sizzy!’

With the sound of the chainsaw polishing on the handle shell, the saw blades splashed everywhere, just like they encountered extremely tough materials, with severe wear.

"Warning! Warning! You are destroying the handle! This damage may cause extremely serious consequences!" The handle suddenly emitted a warning sound. The circular green light at the trademark turned red when used normally, and it kept flashing.

"What did it just say?" The experimenter stopped in surprise. This was the first time he encountered a talking handle!

The recorded video was quickly sent to the foreign affairs department of HNC company. Someone quickly recognized it as Chinese language. After the translation was made, it was sent back to the laboratory staff.

"Extremely serious consequences? Will it continue?" The experimenter felt a little uneasy, as if what he was facing now was not an ordinary electronic product, but a strange alien creature!

This feels so weird, never before!

"Put on protective clothing and protective helmet and continue to see what serious consequences can there be?" Paul's spirit became nervous. He walked out of the office and came to the protective glass wall of the laboratory, looking at the laboratory inside.

After changing into the full set of protective suits, the experimenter continued to tear the handle. When the miniature chainsaw in his hand was sawing, he could no longer saw it. He took it back to his face and saw that all the saw teeth on it had been worn out!

"What material is made of? How could it be so tough?" The experimenter was puzzled and could only replace the saw blade for the chainsaw and continue to disassemble the handle.

Under the constant warning sound of the handle, after changing several saw blades in succession, the experimenter finally cut a small gap on the surface of the handle very completely. Just as the experimenter was considering how to expand the gap, the handle suddenly exploded internally, and then a large amount of black smoke was sprayed out from the gap.

The experimenter screamed in fear, but looked back through the glass. After a burst of choking smoke, the handle did not change much.

After half an hour, no abnormalities were found. After using a gas detector to confirm that there was no poison in the laboratory, the experimenter returned to the laboratory and started cutting the handle shell again. The cutting became extremely smooth, just like cutting an ordinary plastic shell. In a short while, the experimenter completely cut the handle shell.

Unfortunately, there are only some burning electronic components residues left inside the handle, and nothing useful is left.

"It seems they have taken some kind of protective measures that prevent us from resolving the technology inside." The experimenter lamented.

Paul's face was gloomy and clear, as if he was happy or sad. After a long time, he spoke up to the experimenter for the next instructions.

Under Paul's instructions, the experimenters turned to another experiment, home-style seats and helmets.

Soon the experimenters encountered the same problem as the handle. These products were all sealed with plastic. The anti-tamper strips were just decorations. If you want to disassemble them, you can only use cutting methods.

"It is estimated that the cutting and results may be similar to the gamepad. Will you continue to cut?" The experimenter asked Paul. This thing is worth 90,000 US dollars! And everything inside is so magical that the experimenter couldn't bear to start when cutting.

"Continue to cut!" Paul nodded. What if the seat and helmet use packaging technology that is different from the gamepad?

The final experimental results completely dispelled Paul's idea of ​​reverse disassembly to obtain the VR technology of Fengqi Amusement Equipment Factory. Whether it is the seat or the helmet, after disassembly, it all exploded like the handle, and then completely damaged. Before a better and correct disassembly method was found, their reverse disassembly experiment would definitely not be able to continue.

Now, HNC company only has one way to obtain the technology of Fengqi Amusement Equipment Factory.

That is acquisition.

"Irving, you must take down this factory!" Paul's expression became a little crazy in an instant. He picked up his phone and yelled at Irving who was in China.

"Okay, I'll fly to Tianhu Province today and talk to that boss Qi about the acquisition tomorrow. Our bottom line is 50 million US dollars, right?" Irving was not surprised by Paul's decision at all.

"Yes, $50 million, you try to get a deal at a lower price."
Chapter completed!