Come to the second floor.

Chen Yi turned on the computer and found the previous drone design drawings.

Connect to the 3D printer and reprint a wave of drone accessories.

For the ion-propulsion drone that was tested before, the properties of the battery, the equipped radar camera module, and the communication module were all overlaid and comprehended multiple times.

Now add solar panels and add external functional modules.

The item's quantum field will collapse and reorganize again, making it impossible to read subsequent information.

If you want to make further improvements and read technical information, you can only use materials and accessories that have not been adjusted and superimposed to make a new drone.

Observe for a while to make sure the 3D printing is running normally.

Chen Yi took the previous drone, connected it to the computer, and exported the test flight data of the last black hawk hunting.

Data is being exported automatically.

Chen Yi went over and turned on the battery production equipment and produced a batch of batteries again.

A few hours later.

New drone accessories, engine modules, and batteries are all produced.

Chen Yi picked up the parts that were still warm, quickly completed the assembly of the drone, and imported the manually written avionics control program.

Then, use the original version without adjusting the properties.

The theoretical safety attribute is 10, but the actual safety attribute is only 1.4 batteries. Carefully connect them in parallel and install them.

"Phew, it didn't explode. It seems that my technology is better than Samsung Note 7."

Seeing that the battery was successfully installed, the expected smoke, fire and explosion did not occur.

Chen Yi breathed a sigh of relief, took the solar panel next to him, boosted and rectified it, and connected it to the charging end of the battery.

[Item: Ion Propulsion Drone]

[Attributes: Energy x42.1(!), Speed ​​x1.6, Quality x21, Stability x2.6, Strength x14, Communication x12.5, Radar photography x10.6, Avionics x34.5, Beauty x3.8, Battery life

Supplement x4.6...】

【Conscious wave:7620203】

[Note: This is an ion propulsion aircraft with a unique design, but unfortunately, the unsafe and stable energy core makes it full of dangers, and the cumbersome battery life supplement module causes the stability, speed, appearance, etc. to plummet, making it impossible to fly normally.

.】

"I didn't expect that this explosive battery would even have an exclamation mark as a warning."

Chen Yi took a few steps back to ensure that he stood at the maximum safe distance from which he could adjust his attributes.

Phew!

Colorful light blooms.

The drone carrying a solar panel in front of Chen Yi was shrouded.

The properties of solar panels are rapidly adjusting, and their shapes and forms are constantly changing.

After more than ten seconds, the light dissipated.

The originally thick, hard, and square monocrystalline silicon solar panels disappeared.

It is replaced by a special black translucent film.

There are also faint golden threads spreading on the film, forming small nodes like slime mold, and finally converging into two wires, connected to the charging port of the drone.

"This is a bit like the membrane circuit board in the previous membrane keyboard."

Chen Yi looked at this brand new solar circuit board and checked the properties of the drone.

[Item: Ion Propulsion Drone]

[Attributes: Energy x21.1(!), Speed ​​x2.6, Quality x21, Stability x2.6, Strength x14, Communication x12.5, Radar photography x10.6, Avionics x34.5, Beauty x4.8, Battery life

Supplement x24.6...】

【Conscious wave:7618203】

[It is detected that a certain attribute exceeds the initial value. Do you want to read the information? Yes/No!]

[Note: This is a unique ion propulsion aircraft, but unfortunately, its unsafe and stable energy core makes it full of dangers.

The thin and light battery life supplement module also reduces its stability, speed, appearance, etc.

Perhaps, you can find a way to attach the film to the surface of the fuselage, which may bring you some surprises.]

"The solar panel becomes a solar cell film, which improves the appearance a little bit."

"The idea of ​​attaching the battery membrane plate to the surface of the fuselage is exactly what I want. It seems that the system understands me quite well."

"But unfortunately, it is just a simple fit, which cannot withstand high speeds."

Chen Yi looked at the comments and was not in a hurry to read the information.

Instead, he took out a monocrystalline silicon solar panel, connected it to a high-precision current and power measuring instrument, and placed it under the sun on the balcony.

Then, the solar cell film was connected to the current and power measuring instruments.

Spread it out together with the monocrystalline silicon panels and place it on the balcony to enjoy the sunshine.

Five minutes later.

Chen Yi wrote down the power values ​​of the single solar panel and solar cell film, then measured the areas of the two, and finally obtained the solar energy conversion efficiency of the two.

"After calculation, the standard unit area.

The average power of the battery film for ten minutes is 42 watts, and the power of the monocrystalline silicon solar panel for ten minutes is 21 watts.

According to most monocrystalline silicon solar panels, the actual solar energy conversion rate is 18%.

The solar energy conversion rate of this battery film reaches 35.9%."

Looking at the calculated values, Chen Yi shook his head in disappointment.

35.9% solar energy conversion rate.

It is still far from the standard he requires.

As far as he knows, it was as early as two years ago.

NREL researchers from Yingjiang used II-V compound materials to develop a solar panel with a conversion rate of nearly 50% in the laboratory.

"Read information."

Dense information emerged in Chen Yi's mind.

Compared with the previous complex material structures or dense algorithms.

This time the message is relatively simple.

It is a thin-film semiconductor material with a light-concentrating structure produced by chemical deposition. It also has corresponding slicing, series connection, splicing, lamination, chemical packaging and other processes.

The process is very common and can be completed by any solar panel manufacturer.

The real essence is this special semiconductor material.

This chapter is not over yet, please click on the next page to continue reading!

Common polycrystalline silicon or monocrystalline silicon solar panels.

This is through the photoelectric effect of semiconductors, which converts light energy into electrical energy.

However, because the reflectivity of the single crystal silicon material itself is too high, a considerable part of the energy is reflected.

Some giant solar photovoltaic bases reflect light so densely that sometimes birds flying over can be stunned.

Now this unique thin film semiconductor compound material is made through a special microstructure.

Like a magnifying glass.

Gather the light irradiated from the outside, reduce reflection, and increase the intensity and efficiency of light conversion.

"It seems to improve the light-gathering effect of the material and reduce reflection."

"This should be the technological breakthrough direction of the next generation of solar panels."

Chen Yi guessed in his mind and continued to adjust the attributes.

【Energy:21.1→7.1】

【Aviation:34.5→24.5】

[Battery life supplement: 24.6→44.6]

【Stable:2.6→4.6】

【Speed:2.6→4.6】

[It is detected that a certain attribute exceeds the initial value. Do you want to read the information? Yes/No!]

The light dissipated, and what appeared in front of Chen Yi was a thin and translucent plate.
To be continued...