The volcano is burning. The thick magma is flowing without strong winds and waves. It is because the weight of the magma is not comparable to the sea water of the sea. When the fiery red color encounters the magma, it is golden. It is a lava hell. In the center of this hell, there is such a huge chimney. The chimney is very strong and can withstand high temperatures of thousands of degrees. It is a wonder in the center of this magma. However, this chimney is not a real simple chimney. There is a pipe above it, which is connected to other directions. The reinforced high-temperature alloy cables fix the huge chimney.

Of course, this chimney can also be said to be a pipe. Super hydraulic pressure with a pressure of more than 500,000 tons will release the power of this pipe to the maximum extent.

Pipes that are five or six meters thick hope to withstand the pressure of more than 500,000 tons.

But there is no one in the construction site, only the Terminator.

Hundreds of Terminators are hanging in the air, filling in leaks at any time and adjusting the operation of pipelines at any time.

Above, a huge factory has covered it, and no one can know what is happening inside.

The thick smoke from the crater is directly accepted by a new super air purification factory. After the air is quickly purified, all the minerals produced are recycled, which produces a lot of things.

A large amount of materials are produced, and various pollutants in the volcano are decomposed and become substances in people's lives, gradually becoming chemical substances in life, playing an important role in life.

When the garbage material from volcanoes turns waste into treasure, the other things needed will be easier to obtain.

In this huge pipeline, the latest models of boiling resistant liquid will be added at any time to add pressure to the entire down facility.

The operation of the internal device is all conducted experiments and used according to the design of scientists.

These devices have been tested by scientists, from small to medium-sized tests, and have almost doubled the pressure.

Now it starts to run formally.

The huge machine did not steam the smoke like the real steam era machinery, and seemed to have a little less smell.

It was really far away, about a few kilometers away, Si Fan and a group of scientists were operating machinery in the control room.

"Mr. Si Fan, we can go nearby to watch the operation of the machinery, without being so conservative." said a scientist next to him.

Si Fan looked at him with contempt and said gritting his teeth: "Don't look down on your life so much. This machine is designed by you, and you must not think that you are a wall of iron. The opposite machine is a machine that will cause 500,000 tons of pressure. If an accident occurs, there will be dangerous areas within one kilometer nearby. Even if we are not lucky here, we will be affected."

He was right, this is a power of 500,000 tons, and no one can ignore it.

The scientist next to him was silent, and Si Fan quietly looked at all the data.

"The temperature rises to 1227 degrees and the instrument is running normally and you can start applying pressure." A young operator said on the next operating table.

Si Fan looked at the scientists around him and said that this project was not led by one person, they all started to develop slowly according to one person's wishes, and slowly made projects according to people's wishes.

Now they are all working together, everyone is sending their own ideas, and then seeing if they can have the opportunity to combine into this huge super forging factory.

After they slowly contribute their strength, the overall assembly will be easier. It is their final goal to effectively and efficiently make this machine run.

It is their purpose to successfully forge the first artifact.

Everyone stood here and waited for the results.

"Start start." Si Fan ordered the operator to start the operation, and there was only one operator, no one else helped.

When it starts up, all the devices will run automatically.

This is a fully automatic device and it is definitely not something that allows people to come to the construction and operation.

However, the work materials have standard shapes. When feeding the blast material, they are actually automatically clamped.

Now when Si Fan ordered and started the machine, all the design drawings on this side were automatically entered, or the samples were brought, and all the data was scanned and copied completely.

This mold is very fluid-style.

Si Fan was very shocked at the time. The entire mold used a special metal with high-temperature solids and room temperature liquids. This metal was discovered recently. It is a soft liquid in a low temperature environment. However, it starts to condense after the temperature reaches 100 degrees. It becomes very hard at 300 degrees. After 500 degrees, it will be hard to reach the alloy level.

When the temperature rises to 1200 degrees, it is already comparable to diamonds and even stronger.

This magical metal is very useful in this environment. It only needs to be molded at low temperatures, fixed at high temperatures, and then used.

The entire process is automatically operated by internal machinery, which is very convenient.

Si Fan watched a large amount of magma slowly flow into the grooves prepared in advance, gradually filling the huge container.

This is the core of the entire forging. The weight of magma is not comparable to that of water. There are volcanoes here.

When the magma was almost flush with the top, Si Fan's test data was shown.

"It's enough 500,000 tons," the operator said.

Si Fan gave an order: "Start."

The operator just clicked the equipment.

I heard a "boom!@!~", and the huge pressure was released instantly, and the super impact force briefly rubbed on the high-temperature guide rail.

However, the friction is not as large as imagined. The magnetic guide makes the track very stable, and then the huge impact force drops along the magnetic field.

The instant acceleration is quite domineering.

"Boom!" Another sound, and Si Fan waited for the result.

In the huge volcano, it was like an eruption, a violent eruption filled with dust. A huge earthquake seemed to have happened.

The ground was trembling.

The operator took a long time to look at Si Fan.

"Boss, the process has been completed," he said, and then clicked on the next interface.

Si Fan just nodded silently and looked at the monitor. The workpiece had gradually begun to separate, and then it started to the next process. The workpiece was going to be heat treated.

In Si Fan's view, this workpiece is a huge propeller blade, which should be used on large ships.
Chapter completed!