"Dongdongdongdongdongdong!" Three times, the sound of knocking on the door rang in the conference room, and then pushed the door open and Si Fan and his secretary came in. After the two of them came in, they went directly to the seat of the main seat and then sat down.

"Hello, I am Si Fan. I think today's meeting can begin." Si Fan reached out to ask them to speak.

Professor Carlin is ready long ago.

"Dear Mr. Si Fan, you must also know that we are here today. We are going to complete the manufacturing of a new CNC machining center. We need parts and processing technology with particularly high performance in specific parts. We hope to seek cooperation to make the metals or parts we need in Mr. Si Fan's factory." Professor Kalin finished speaking and began to press the switch.

The presentation of PPT is displayed on the computer screen. In front of me is a very high-tech machine tool. The first one appears was him, about five or six meters tall, and can fully process large workpieces.

"Our design is a universal machine tool. It can clamp large workpieces or small parts. At the beginning of the design, it was the goal of the world's manufacturing and mother machine factory."

In Kalin's introduction, Si Fan gradually understood this super-large machining center.

But I still looked at some of the things inside them and frowned.

"It seems that all the cores of this machining center are extended around this universal shaft system, but other aspects seem to be not much different from ordinary machining centers, right?" Si Fan said.

This is very important. During processing, the current situation has not changed much, and the work efficiency is still very low. In Si Fan's eyes, this is a serious waste of his own resources. He used top-level cosmic metals, which improved such a little processing ability?

Professor Kalin opposite looked at Si Fan's obviously dissatisfied expression and was also a little scared. He knew that Si Fan could find a solution here. But obviously Si Fan's request was not just that.

At Si Fan's request, he suddenly thought of the fantasies of some of his former students and their professors.

I can only say that I was crazy because they said that these things seemed funny and could not be completed.

But Si Fan said now, what should they do?

"In fact, we should be able to complete the overall design, but this requirement for materials and technology is really too high, and it is our imagination of the future." Professor Kalin is a very realistic person, completely realistic and explained to Si Fan.

Looking at the average and average PPT in front of him, well, at least Si Fan seems to be a normal machine tool, and he is more interested in that imagination.

"Actually, the materials we can provide you are very, very special. If you can meet our requirements, our Skynet Group will provide you with this special metal."

"The amount of materials is not very large, it is only a little over a hundred tons. If there are more, it will be really gone. The performance of metal is unquestionable. You can consider it to the ideal limit."

"However, the design must meet my requirements, otherwise you can only get the most basic material provided by Skynet Group, which is the high-quality alloys we have born in the volcanic furnace. These alloys should barely meet your requirements and can be used for manufacturing."

Si Fan's words made these professors' eyes lit up. She found that Skynet Group actually had better things, and the best metals were limited in quantity, but they could be designed according to the imagined limit.

This is simply their gospel.

What they consider will always be based on the current metal properties and increase on current machine tools and equipment.

When Si Fan said it, the innovation in their heads was not enough, and they could only rely on their own students.

He remembered that his students had said many unreliable ideas, of course, that was the design he had in his dream a hundred years later.

He turned to look at his apprentice Carter.

This is a young man. He has profound knowledge, but he does not have much experience. He is just a ignorant and impulsive boy. He likes to dream and has ideas.

But his ideas are generally unreliable.

Now that I have an unreliable idea, I have to see if I can see those metals.

He believed that if he could see the metal, he would have better ideas.

Carter never expected that he would show off one day. He stood up in a daze, almost subconsciously, as if he was answering questions in class.

"Mr. Si Fan, I once imagined that a real CNC machining center should completely subvert the current form, from the clamping process to the real cutting process."

"Our machine tool clamping uses bulky fixed clamping. Most of the clamping needs to be clamped multiple times when cutting, which will cause errors. If you use a multi-point clamping method, you can avoid these. Or from the beginning, it seems that he has been clamped flexibly and has been re-clamped countless times." Carter introduced his design.

What he conceived was that Si Fan asked the system to help build it.

"You said, I'll arrange someone to implement it on the computer, and you can make subtle adjustments." Si Fan said.

At this time, Carter can fully describe the machine tool in his goal according to his own ideas.

The machine tools he mentioned were really completely different from what these professors said.

In his mind, this machine tool should be 360 ​​degrees without dead corner clamping. There are clamping parts at each position, just like a planet. The parts are clamped in mid-air. One sun rail and one month rail is clamped and the other is cutting. They do not interfere with each other. The clamping tools are tiny support frames, which are constantly supported by new support frames, and the previous support frame is removed.

The moon rail is even more convenient. It is a constantly rotating cutting knife that works around the workpiece. No matter what kind of workpiece it is, it can be cut quickly. The tool changing system of thousands of tools can make cutting very easy.

This is the CNC machining center he imagined.

Instead of the stupid, big, black and thick machine tools are still clamped before. After processing half of the process, then move over, then clamp and cut the other half.

It not only affects a certain degree of accuracy but also makes the work unable to use many shapes.

The design in his goal must be the best.

Even Si Fan had to praise him. His idea was really good, as for the knife change system.
Chapter completed!