April 1st.

Xinghai Group has realized mass production of IGBT arc welding inverters, and it is estimated that the monthly output can reach 60,000 units, meeting the company's needs.

Mu Yang breathed a sigh of relief when he heard the news.

The initial sample production went very smoothly, and he thought mass production would be possible on March 20.

However, things did not develop as he expected. During the process, there were some problems with the tooling fixtures, which delayed a lot of time.

Fortunately, the project team members were adjusted.

The task was originally planned to be completed within one month, but in the end it was delayed by ten days.

Recently, Mo Yang and the project team members have almost collapsed. Mu Yang inspected the laboratory many times and saw that the employees were a little anxious. He told everyone not to be so anxious. If it is later, the impact will not be big.

When the project team members heard what their boss said, they felt much less stressed, but everyone felt ashamed.

Especially Mo Yang, everyone promised to complete the task within a month, but now they can't complete it on time. It feels very embarrassing. I don't dare to think about bonuses. I just want to complete mass production as soon as possible without delaying the company's production of secondary welding machines.

Two days after mass production stabilized, Muyang convened a meeting of the IGBT arc welding inverter project team.

Mu Yang glanced at the exhausted project team members, felt relieved, and said with a smile: "Thank you for your hard work. Although the completion time exceeded the scheduled time by eleven days, the time I set was also a bit urgent. Overall, I am very satisfied.

This result."

"Chairman, it's my problem that you failed to complete the task as per the requirements."

Mo Yang took the initiative to take responsibility for this mistake.

"Chairman, it's not the team leader's fault, it's my problem. The tooling fixtures were not properly inspected, resulting in errors in the tooling assembly..."

Mu Yang waved his hand, interrupted him, and said: "As I said, this is not your fault, nor is it my fault Mo Yang. You have done a good job and are able to face difficulties as a team, which deserves praise."

When everyone heard what the boss said, they felt much relieved, but they were afraid that the boss would blame them.

"I have inspected the production line and there are no problems. It has now entered mass production stably. According to my previous promise, after the task is completed, the company will give you material rewards. Mr. Zhou, please read it out." After Mu Yang finished speaking,

, let Zhou Chen read it out.

Zhou Chen had a smile on his face: "The project progress has indeed been completed well. Some delays are normal. The chairman and I discussed it and gave cash rewards to the project team members. As the team leader, Mo Yang was responsible, responsible and united during the task.

Team members will be rewarded 150,000 yuan..."

The maximum reward is 150,000 yuan, and the minimum reward is 30,000 yuan.

The bonus is not as good as the year-end bonus, but this project is just a small project, not difficult, but time is tight.

After Zhou Chen made the announcement, he distributed the rewards in person. The project team members took the heavy tickets with both hands and were very excited.

…

Xinghai Group held project awards,

At this time, Shanghai, Pudong.

Shangri-La Hotel, conference room on the third floor.

Still the same place.

Xinghai Group's competitor, the Secondary Welding Machinery Alliance, still holds meetings here.

One month later, Xinghai Group has not interrupted its supply chain.

According to the information they found, a new style IGBT arc welding inverter was found on Xinghai Group’s new secondary welding machine, and the manufacturer was Xinghai Group.

After receiving this news, the top leaders of the alliance suddenly panicked.

Ruined!

At the same time, I also feel incredible: How can Xinghai Group produce new IGBT arc welding inverters so quickly?

How long has it been? It’s only been forty days from recruiting people to now!

The atmosphere in the conference room was very depressing, and no one saw the possibility of defeating Xinghai Group.

The senior management of Miller Welding Machine Company was very unhappy and blamed Tangshan Songshang: "Mr. Du, this is all your bad idea. Now, Xinghai Group has not interrupted the supply chain because of this."

"That's right, our investment was in vain, and now the situation is getting worse and worse."

When Du Ping saw these people blaming him, he still had a dull expression and did not get angry. He calmly explained: "Everyone, this is something we didn't expect. It was indeed a mistake in my judgment.

However, if you think about it, it would be extremely difficult for your company to mass-produce IGBT arc welding inverters from scratch, not to mention one month, but three months.

But a miracle happened in Xinghai Group, and we have to admire the enemy's strength."

In the past, they were competitors and fought to the death, but now they are united to deal with a company. This is so ironic!

And they still can't fight. The Xinghai Group's fight against them is simply a three-dimensional fight against two-dimensional ones.

"Hey, this is what fate is like!" Mr. Shen Gong Zhang sighed. He is a believer in Buddhism. When he goes back this time, he wants to burn incense and worship Buddha to pray for peace.

The senior management of Miller Welding Machine Company laughed twice and asked sarcastically: "Then what good solution does Mr. Du have?"

"No." Du Ping smiled. Even if there was, he no longer counted on this alliance.

Some elders feel that this alliance is meaningless.

"You guys just take your time. I'm withdrawing from this alliance. There's no need to call me when we have a meeting next time."

"I'm quitting too. It's meaningless. It's just a waste of money."

After the two elders finished speaking, they left directly. As for the future development, it depends on fate.

Du Ping did not dissuade the bosses. Now the alliance is fighting against the Xinghai Group. The result is obvious, they are completely defeated!

And there is no better way.

After the two big bosses left, three more big bosses announced their withdrawal. Needless to say, the rest of the alliance was disbanded.

Du Ping sighed and left the conference room.

It only took more than two months for this alliance to go from being full of confidence when it was established to being discouraged now.

There are several foreign-funded companies that lead the production and sales of secondary-guaranteed welding machines. Their business is miserable, they are in a state of serious losses, and they are not far from going bankrupt.

When I go back this time, I am planning to liquidate my assets and prepare to withdraw my capital.

According to the provisions of the Implementation Rules of my country's Foreign-Funded Enterprise Law, if a foreign-funded enterprise wants to divest its capital and does not want to continue operating, it should submit a termination application, submit it to the approval authority for approval, and carry out liquidation.

Termination will only be allowed if the conditions are met.

…

A few days later, Du Ping returned to work at the company.

In the afternoon, not long after he went to work, general manager Mi Sen reported to him an urgent matter.

"Chairman, Xinghai Group has launched two new welding machines, tungsten and argon arc welding machines. Their performance is very superior. I feel they are aimed at us."

When Du Ping heard this, he almost stumbled and fell, and quickly supported a corner of the desk.

Mi Sen panicked and quickly helped him.

"I'm fine." Du Ping waved, with a sad look on his face, "Let me tell you."

Misen said respectfully: "Hi, the market prices of Xinghai Group's 400 and 500 tungsten argon arc welding machines with cooling water tanks are 10,000 yuan and 11,000 yuan respectively, which are 1,000 yuan lower than our 400TX1 and 500TX2 respectively.

There is not much difference in the performance of the welding machine host, mainly in the welding gun structure, tungsten needle and tungsten needle grinder.

For an additional price of two thousand yuan, we will get a special tungsten needle grinder. They have special tungsten needles for 2.7, 3.5 and 4.5. They have different diameters than our regular 2.0, 3.0, 3.2, 4.0 and 5.0. We cannot use the other party’s tungsten needles.

Sander.

Xinghai Group's welding guns are also unique. For this reason, tungsten needles are also specially customized.

Moreover, for an additional price of 8,000 yuan, an automatic wire adding device can be connected. The welding effect is very good. The welding machine can match a wide range of processes. With their own special tungsten needle and welding gun, the arc is very uniform and tungsten pinching rarely occurs.

"

Du Ping felt that the sky was about to collapse: "Do you have the other party's equipment?"

Their company mainly produces and sells secondary protection welding machines, followed by tungsten argon arc welding equipment. If the tungsten argon arc welding equipment market is over again, like other international friends, they will have no choice but to withdraw their investment and leave China.

"Yes, we finally bought one, and it's in the laboratory." Mi Sen also looked sad. In order to study competitors, it is normal to purchase their equipment, and they have to buy it secretly.

"Go take a look and call the technical director Masao Kosaka." Du Ping ordered, walking heavily towards the laboratory.

What he wanted to see was the specific strengths of Xinghai Group's tungsten argon arc welding equipment.

Half an hour later,

Du Ping finally figured out the advantages of Xinghai Group.

The main unit of the tungsten arc welding machine is smaller in size than the secondary welding machine, has fewer spare parts, and has lower production costs, so it is sold much cheaper.

According to the analysis of the technical department, there is not much difference between the welding machines. The main reason is that the structure of the gun head and the tungsten needle are somewhat different. The diameter of their tungsten needle is different from the conventional one.

The reason why Xinghai Group did this is unknown. The technical department analyzed that it may be to avoid using its tungsten needles with conventional welding guns.

There is currently no equipment for polishing tungsten needles on the market.

This equipment is not complicated. It's not that the manufacturer is unwilling to research it, but that the customer is unwilling to spend the money to buy it.

Because grinding tungsten needles are manually polished on a grinder, they can be used and do not require special grinding equipment.
To be continued...