"I have prepared two maintenance plans. The charges for each plan are different. It is up to you to decide which one to use."

Guo Yonghe gave a prepared answer:

"The first set of cases is that I provide emergency repairs to the magnetic circuit break of this printed circuit board, and the charge is only 5,000 yuan.

"The advantages of this solution are: first, the maintenance time is short, and it only takes two to three hours to complete the fault repair of the printed circuit board; second, compared with the second solution, the cost is much lower.

"As for the shortcoming of the first option, that is the limited time that the printed circuit board can work normally after emergency repair. Since I took emergency repair measures, I can only guarantee that the repaired printed circuit board will be able to work normally within one month.

If there is no failure, you must buy back the spare parts of the printed circuit plug-in board within this month to replace it, because after more than one month, it will be difficult to ensure that the printed circuit plug-in board can still operate normally!"

After hearing this, Li Weijin exchanged glances with Zhang Jianshe and Section Chief Tang, and then asked: "Expert Guo, what about the second maintenance plan?"

"The second set of maintenance plans I provide is to perform normal maintenance on the circuit breakage of this printed circuit plug-in board in accordance with international standards. Of course, the charges will also be based on normal international maintenance charging standards, so the maintenance cost will not be low.

At seventy thousand yuan.

“The biggest advantage of this solution is that the normal working life of the repaired printed circuit board is guaranteed to be at least two years. Within two years, if a non-human failure occurs on the printed circuit board under normal working conditions,

I am responsible for free maintenance.

"There are two disadvantages of this plan. In addition to the maintenance cost that I mentioned earlier is much more expensive than the first plan, the maintenance time is also longer.

"Because I need to prepare some maintenance equipment and tools, as well as make some special maintenance materials, it will take about seven to eight days to start the repair. Of course, I can guarantee that no matter how long the entire repair process takes, it will not exceed

Ten days.”

"In other words, if you choose to use the second maintenance plan, the minimum time will take seven days, and the maximum time will not exceed ten days?" Li Weijin said.

"That's what it means."

Guo Yonghe nodded, and then said: "However, whether you decide to choose the first maintenance plan or the second maintenance plan, there is an additional condition."

"What additional conditions?" Li Weijin asked.

"The situation is like this. Our internal parts factory needs some crl2mov cold work die steel to make cold heading dies. According to the report from Wujiao Chemical Company, the last ton of crl2mov cold work die steel in their inventory was sold to you Zhongtian yesterday.

The aluminum factory bought it.

"So, I hope that your Zhongtian Aluminum Plant can even out 500 kilograms of crl2mov cold work die steel for us. Of course, we will also pay the corresponding price according to the price you purchased."

"I still need to find out more about crl2mov cold work die steel from relevant personnel,"

Li Weijin said: "If it is indeed our factory that bought it and hasn't used it yet, it shouldn't be a big problem to distribute 500 kilograms to your factory.

"As for whether to adopt the first set of maintenance plans or the second set of maintenance plans for the printed circuit board, I have to ask Expert Guo to wait a little longer. I need to report to the factory leaders together with Director Zhang and Section Chief Tang.

As for which maintenance plan to adopt in the end, we have to wait for the factory leaders to make a decision before deciding!"

Li Weijin, Zhang Jianshe and Section Chief Tang left in a hurry.

About half an hour later, the three of them accompanied Wen Qingyan, the deputy director in charge of production at Zhongtian Aluminum Factory, back to the equipment maintenance department.

"Expert Guo,"

Wen Qingyan briefly shook hands with Guo Yonghe, and then asked directly: "I would like to ask, can we choose two sets of maintenance plans together?

"That is to say, please first adopt the first set of maintenance plans to carry out emergency repairs on the printed circuit boards so that our production lines can resume production first. Then, after you have prepared all the repair equipment, tools and corresponding maintenance materials, then

Then remove the printed circuit board from the industrial computer and perform normal maintenance."

Guo Yonghe couldn't help but laugh. This was originally a small hole he dug for Zhongtian Aluminum Factory.

Only a fool would make a choice, a wise man would of course want both!

Wen Qingyan, the deputy director of Zhongtian Aluminum Factory, is obviously a smart man.

"Director Wen, of course you can!"

He nodded and replied.

"Won't the emergency repair measures you took on the printed circuit plug-in board affect the second normal repair of it?" Wen Qingyan raised his concerns again.

"Not at all!"

Guo Yonghe nodded and replied: "The emergency maintenance measures I took did not make any qualitative changes to the printed circuit board, so how could it affect its normal secondary maintenance?"

"That's good!"

Wen Qingyan let out a long breath, "Then ask Expert Guo to carry out emergency repairs on the printed circuit plug-in board now, so that our industrial computer can resume normal operation first and the production line can be started up first!"

"Of course it's no problem,"

Guo Yonghe nodded, but then said: "It's just Director Wen, I mentioned to Director Li before about crl2mov cold work die steel..."

"Oh, I almost forgot about this!"

Wen Qingyan laughed and waved his hand, "Isn't it just half a ton of crl2mov cold-worked mold steel? No problem. After your emergency repair plan for the printed circuit board is completed, I will send a truck to directly transport half a ton of crl2mov cold-worked mold steel.

Send it to your factory!"

"Thank you, Director Wen!"

Guo Yonghe laughed. With half a ton of cold work die steel, the plan to contract a labor service company to produce special slender bolts can proceed smoothly again.

"Director Wen, my emergency repair plan still requires some materials from your factory." He said.

"What material?" Wen Qingyan asked.

"A 6-hour drawing pencil, a small bottle of quick-drying paint and 5,000 ml of glycerol solvent. The glycerol solvent must be of chemical purity. The water content of industrial purity is too high, which will have a greater impact on the repair effect."

Guo Yonghe replied.

Section Chief Tang and several engineers from the Equipment Maintenance Department looked at each other. They could not have imagined that the materials required for Guo Yonghe's emergency repair plan would be so simple yet so strange.

6h drawing pencil, quick-drying paint and glycerol solvent, these three simple but unrelated things were used by Guo Yonghe to emergency repair the large printed circuit board of Texas Instruments industrial computer.

The materials simply shattered the views of engineers with professional backgrounds.

"Chief Tang, how long does it take to prepare these materials?"

When Wen Qingyan saw that Section Chief Tang was stunned, he immediately snorted in displeasure and asked.

"The 6h drawing pencil and quick-drying paint are ready-made and can be picked up in a few minutes."

Section Chief Tang reacted and quickly replied: "As for the glycerol solvent, you may need to go to the factory laboratory to ask. If the glycerol solvent they have in stock is not of chemical purity or is less than 5,000 ml, you need to go to the market.

Went here to do some shopping!”
Chapter completed!