When it comes to smearing China, some foreign media really do it for the sake of being black, and don't care at all about the authenticity of the news.

What they need is hot spots and attention.

There is not much to say about these media outlets.

If you talk to others, unless you can kill them, they are disgusting you.

Quotes out of context happen all the time.

Li Wenhao didn't know that the media outside were already making a huge noise because of the new materials they leaked.

But even if you knew it, it wouldn't be a big deal.

If you quarrel, let him quarrel, and do your own thing in peace and quiet.

After Li Wenhao finished showing the new material and everyone else returned to their seats, he continued to introduce: "I believe everyone has seen this new material. If there are no questions about the new material, then I will continue to introduce it.

."

As he spoke, Li Wenhao looked around to see if he had any questions.

I saw other people looking at him attentively, but none of them spoke.

They don't really have no doubts. As a new material and a material that can be used to make chips, how can there be no doubts about it?

However, they also know that some questions are not suitable to be raised now. After the meeting, when they officially enter the research and development work, it is not too late to discuss and study them slowly.

After Li Wenhao explained the new materials and then took out the new materials, everyone subconsciously leaned towards Li Wenhao.

It's not that other colleagues are partial, it's that the two parties are not on the same level.

If Li Wenhao simply described the plan, people might still lean towards Wang Dequan. After all, the 5-nanometer process Wang Dequan gave is a common practice in the world. The only difference is in the details.

Moreover, Wang Dequan has been studying the 5nm process at Huawei HiSilicon for who knows how long, and there is a very high probability of realizing the 5nm process.

But all this is based on Li Wenhao not doing much.

Now Li Wenhao suddenly gave out a new type of material, just like in the Landlord game. He just played his cards and then came a bomb. Although it was not as shocking as Wang Zhao, it also showed that the cards in Li Wenhao's hand would definitely make his opponent despair.

of cards.

It is true that Li Wenhao has not yet described how to use this new material to produce a chip with a 60 picometer process, but what he is talking about now is the feasibility study plan, which is a general plan, and it will not be too late to study the details later.

Some people even think that maybe at the end of the story, they wouldn’t be surprised if Li Wenhao directly produced a 60 picometer chip.

At this moment, they seemed to know how Li Wenhao solved the accuracy problem.

Now that the material is available, how to make a "transistor" on this material is the most important and most anticipated thing.

Sure enough, after Li Wenhao introduced the new materials, he started to introduce equipment issues.

Li Wenhao operated the holographic screen and scrolled down.

Title: "On how to build a photolithography machine."

When everyone read this title, they couldn't help but take a breath of cold air.

Damn it, does this mean you want to make your own photolithography machine?

Originally, everyone thought they would buy a Dutch EUV lithography machine to produce chips with a 60 picometer process. After all, this is the most advanced lithography machine currently. Apart from this, they could not think of any other way to solve this problem.

But they never expected that Li Wenhao's ambition would be so powerful. He not only wanted to develop new materials, but also wanted to make his own photolithography machines.

Although I was shocked by this title, after thinking about it again, I felt that it was a bit natural.

Although the EUV lithography machine produced by ASML in the Netherlands is the most advanced lithography machine, it may not be possible to produce 60 picometer chips.

Since even the top EUV lithography machine can't do it, can a self-made lithography machine be able to do it?

This question came to everyone's mind.

The production of lithography machines is not something that ordinary people can handle. Even the EUV lithography machines produced by ASML in the Netherlands are not produced solely by ASML. They are products created by the technical strength of the world's top companies.

Such a lithography machine cannot meet the requirements for making chips with a 60 picometer process. Could it be that the lithography machine made by Li Wenhao himself can achieve this function?

Or in other words, like new materials, physical machines have already been manufactured?

Thinking of this, everyone sitting under the conference room looked at each other, and then looked at Li Wenhao with fiery eyes.

Not only them, but also Wang Dequan, who was sitting aside, had eyes full of eagerness.

Li Wenhao was stared at by everyone, and his heart went crazy. He couldn't help joking: "Brothers, don't look at me like this. I don't have any special hobbies. My hobbies are normal."

Hearing this, everyone burst into laughter.

"As for the lithography machine I introduced, I have not yet produced it, but I believe that after listening to my introduction, everyone will be able to basically judge whether a similar lithography machine can be produced," Li Wenhao explained.

.

This brand-new photolithography machine was transformed by Li Wenhao based on the classic model of the apocalyptic world in order to be able to manufacture it at this point in time.

Of course, at this point in time, due to the lack of many materials, substitute materials are used.

This kind of photolithography machine is more than enough to produce 60 picometer chips without any pressure, but the cost will be higher.

The competition now is about feasibility, and it is normal for the cost to be higher.

If Dutch ASML knew that Li Wenhao had such a lithography machine, he would have to buy it even if it cost a sky-high price. This is related to the future development of Dutch ASML, and no matter how much money is spent, it is worth it.

However, the Dutch ASML did not know that a lithography machine that was far more advanced than the EUV lithography machine was about to be born in this competition.

After waiting for laughter for a while, Li Wenhao began to introduce the production of a new photolithography machine.

Compared with the introduction of new materials, when Li Wenhao introduced the lithography machine, everyone was very quiet and focused, for fear of missing some details.

They know a lot about photolithography machines, but they know very little about them.

They have a lot of questions, but they also know that these questions are not raised now.

Without the questions from those below, Li Wenhao explained much faster.

The whole group chatted on it, and after twenty minutes, they finally finished introducing the lithography machine.

"Do you have any questions about lithography machines?"

After explaining, Li Wenhao asked a habitual question.
Chapter completed!