Zhou Zhen still has confidence in Tianxuan processor chips.

Although it is impossible to reach the level of Kirin 990 or Kirin 980 in terms of overall user experience, it is indeed much better than the Fire Dragon 888.

The overall power consumption performance is basically similar to that of Kirin 9000.

However, the performance of this processor chip makes it far ahead of other top flagship processor chips in terms of energy consumption ratio.

"Light to moderate use is the daily environment in which most users use mobile phones. Of course, many netizens will worry about the power consumption of FlexPai phones equipped with the latest Tianxuan processor under light to moderate use."

"For this reason, we specially brought the latest Fire Dragon 888 and a14 chips for comparison!"

In daily use, the unit power consumption of Huolong 888 is 2.9w, the unit power consumption of a14 is 2.2w, and the unit power consumption of Tianxuan 1000 is 1.8w.

When browsing videos, the unit power consumption of Huolong 888 came to 3.9w, the unit power consumption of a14 was 3.1w, and the unit power consumption of Tianxuan 1000 was 2.6w.

…

The exposure of this series of comparative parameters made countless netizens dumbfounded. After all, they did not expect that this processor chip not only has excellent performance, but also the power consumption performance of light to moderate use exceeds their imagination.

Of course, such excellent power consumption performance relies on Yuzhen Semiconductor’s new stacking mode.

Only the four small cores at the bottom will be used for extremely light swiping or browsing the Internet to test knowledge.

When image exclusion is required, only the 8 cores of the lowest-level GPU will be used.

Both CPU and GPU adopt a four-layer three-dimensional stacking architecture, which means that the processor chip has four different schedules in different environments.

This can also reduce power consumption to the lowest level while ensuring performance and user experience.

"With the support of such a processor chip, combined with our latest low-power R5 material screen and ltpo2.0 technology, the battery life of our mobile phones has a very strong guarantee!"

Of course, the processor and screen tips have also improved the battery life of the entire phone.

Of course, this time's mobile phone products also adopt two different extreme methods in terms of battery life and charging.

Big battery and fast charging!

Regular battery and super fast charging!

The non-exploration version of the FlexPai 3 has a large 5050mAh battery and 65W wired and 50W wireless fast charging.

The top flagship mobile phone Ropai 3pro is also equipped with a 4900 mAh battery and 100W wired charging and 50W wireless charging solutions.

As for the exploration version, the battery capacity is reduced to increase the charging power consumption and speed of the phone, and a part of the heat dissipation material is added to the original battery omitted part.

However, the wired charging of the FlexPai 3 Discovery Edition is directly charged to the 100W level, but the battery capacity is reduced to 4600 mAh.

The FlexPai 3pro Discovery Edition has increased wired charging to the highest 120W, and the battery capacity has also been reduced to 4500 mAh.

But even so, the battery life of these four mobile phones is among the best in the industry.

An Wan even directly used the Redmi K30s, which currently has the best battery life in the Android camp, to compare the corresponding battery life.

Among them, the FlexPai 3 with the largest battery capacity has an overall battery life equivalent to 1.6 Redmi K30s.

Even the SoftPai 3 Pro Explorer Edition with the smallest battery has a battery life equivalent to 1.25 Redmi K30s.

It can be said that the current battery life of the entire mobile phone product has become the product with the strongest battery life in the entire Android camp, and even the entire mobile phone camp.

"The Rou Sect is going crazy this time, this configuration is simply terrifying!"

"Indeed, the battery life, screen, and performance are all at the ceiling level!"

"Now let's see how the image goes! If the image is good, I'm afraid this phone will be another miracle machine!"

Netizens in this live broadcast room are also full of expectations for the current products. After all, from the three aspects announced so far, Flexpai is top-notch.

It can even be said to be far ahead of its peers in some aspects.

As for imaging, netizens are even more excited about this product.

The 3rd generation series of SoftPai mobile phones have already achieved this level, so naturally there will not be much shrinkage in terms of images.

Among them, the Flexpai 3 uses the 1/1.33-inch 50-megapixel lens from last year's Howe ov48c on the Flexpai 2spro as the rear lens module.

And this time the secondary camera of the regular version has also been greatly improved.

The three lenses are also equipped with optical anti-shake, and all three lenses are equipped with 7p lenses and 1g glass lenses, which can further prevent glare and astigmatism factors during shooting.

127-degree ultra-wide-angle lens of imx582!

The 5x periscope optical zoom lens of imx582 supports 80x hybrid zoom.

The image performance of the regular version of SoftPai 3 can be said to be a castrated version of SoftPai 2spro.

However, with the main camera lens and the three ISP modules of Tianxuan 1000e, the final imaging effect may be even better than that of SoftPai 2spro.

The imaging of the FlexPai 3 is already so strong. As the top flagship carefully built by FlexPai this time, the upgrade of the FlexPai 3pro in terms of imaging is even more rapid.

The world's first 1/1.08-inch 48-megapixel outsole sensor ov48r2.

This lens is the most powerful sensor developed by Ropai and Howe at a cost of nearly 100 million.

Such a sensor can be said to be infinitely close to one inch, and the unit pixel of this 48-megapixel sensor can reach the level of 1.5um, or even reach the level of 3um.

At the same time, this sensor also incorporates segmented multi-pixel segmentation technology, which can not only directly capture 12-megapixel photos, but also achieve nine-in-one segmentation through corresponding algorithms and technical support to capture 108-megapixel photos.

.

When shooting with 100 million pixels, it can take 100 million pixel photos with a unit pixel of 1um.

"Strong, simply invincible!"

"Is the Rou Sect going to kill everyone this time?"

"I feel that this time the entire Android camp will usher in a violent upheaval!"

The sudden emergence of such a jointly developed sensor immediately made all netizens uneasy.

This time the SoftPai 3 series of mobile phones has really cost a lot of money. This so-called cost-saving can even make the entire mobile phone industry unrivaled.

In addition to such a powerful main camera lens, the wide angle of the FlexPai phone uses a main camera-level ultra-wide-angle lens developed by Haowei and FlexPai.

ov64r, a 64-megapixel sensor with a 1/1.25-inch outsole, has a unit pixel of up to 1.1um level.

And this is also the most powerful ultra-wide-angle lens currently on the market, which is even more powerful than the imx789 ultra-wide-angle lens on the recently revealed Green Factory flagship.

As for the current telephoto lens, it still uses the imx586 periscope lens, but it has been upgraded to 10x optical zoom compared to the previous generation's 5x optical zoom. However, the hybrid zoom still only supports 100x level.

Of course, due to the 10x optical zoom, the viewfinder captured with the 100x hybrid zoom will be clearer than the previous generation.

As for the lens hole on the other module, it is not a so-called mobile phone lens, but a laser sensor specially used for fast focusing.

Such a laser lens can significantly improve the shooting speed and focusing speed.

At the same time, the optical image stabilization of the corresponding three lenses and the peripheral settings of the 7p1g lens are retained.

Flexpai 3pro specially uses the latest eight-axis optical image stabilization in this customized camera, which greatly improves the anti-shake effect.

At the same time, the latest compressed aperture technology is also used in terms of aperture.

You need to know that the larger the base of the phone, the wider the aperture will be.

This time, a new aperture material and corresponding packaging and bundling technology are used, allowing the nearly one-inch outsole sensor to accommodate more light with an f/1.65 aperture.

As for the other overall configuration, it is basically the same as last year’s FlexPai 2spro.

After all, in terms of performance in many aspects such as speakers and so-called linear motors, the Flexpai 2s series has basically achieved the ultimate.

However, this time the mobile phone has also made new improvements in terms of workmanship, and supports the IP68 waterproof function that users have complained about that Flexpai has not had for a long time.

With all the parameters exposed one by one, the SoftPai 3 series products have officially appeared in the public eye at a complete level.

At this moment, Zhou Zhen even wanted to borrow a few words from Future Rebus.

“SoftPai 3 is the king of Android phones!”

“SoftPai 3pro is the light of Android!”

Boy, you can always believe in the light!

The hardware configuration of the product has increased, and of course the corresponding costs have also increased.

For example, an R5 screen costs 2100 per piece.

If you add a full screen, the price will be almost 3,000.

Secondly, the current cost of the entire imaging module of the SoftPai 3pro phone is almost 1,000 yuan.

After all, the shipment volume of FlexPai mobile phone products is not very large, so the corresponding research and development costs cannot be spread equally among the products.

Plus corresponding profits and other configurations, etc...

The hardware cost of a single model of Flexpai 3 is basically close to 4,500 yuan, while the hardware cost of Flexpai 3pro is even more than 5,500 yuan.

Naturally, the price of this product is not cheap.

Among them, FlexPai 3 and 3pro have three storage versions: 8256, 12256 and 12512.

This time, the configuration of the exploration version only has one storage version 16512.

Among them, the starting price of SoftPai 3 is 5,999 yuan, and the prices of the other two storage configurations are 6,299 yuan and 6,799 yuan respectively.

As for the top-end version with the strongest storage configuration, the price of the Discovery Edition has reached 7,999 yuan.
To be continued...