The R10 material OLED screen used in the SoftPai Rs10 series is currently the strongest OLED screen in the industry.

Basically, most of this year's top domestic flagships use this top-notch OLED screen. Even the OLED screen used on the current fruit phone is still the previous generation R8 material screen.

In addition, Rouyu Rs series screens adopt a brand-new feature that has not been adopted by other manufacturers’ screens.

This is also a function that belongs to the SoftPai Rs10 series.

Software dynamic high-resolution technology!

You should know that most of the current software has a fixed resolution, and even watching videos has a fixed resolution.

This means that the hardware has very strong advantages, but the software cannot truly fully utilize these advantages on the hardware.

Therefore, the current Roupai adopts brand-new technology in software, enabling more software to adapt to Roupai OLED high-definition resolution.

This will make the software operation and application have a very comfortable experience. This is also the biggest optimization that the entire SoftPai series has achieved for this screen.

At the same time, this kind of function is also a function that the current Huanpai does not have. After all, this function not only requires certain adaptation to the software, but also needs to be suitable for software changes in terms of hardware scheduling.

In terms of hardware level and software optimization and integration capabilities, Flexpai is far stronger than the sub-brand Huanpai. Naturally, the corresponding Huanpai flagship series is definitely not as good as the Flexpai Rs series in terms of hardware optimization.

The Flexpai Rs10e uses a 2K resolution micro-curved screen this time. The overall screen size is 6.1 inches, which is considered a flagship with a small screen.

At the same time, in terms of weight and thickness, the thickness of this product is only 5.9 mm, and the weight is also controlled at 151 grams. It is a very stylish, thin and small-screen flagship.

The Rs10 and Rs10Pro products use the same 6.67-inch 3K resolution screen. Compared with the Rs10e, the refresh rate of the screen has increased from 144 Hz to 180 Hz.

The thickness of the regular version is controlled at 6.9 mm, and the weight is controlled at 178 grams.

Due to the corresponding changes in stacking materials and materials, the overall thickness of the Pro version is controlled at 7.5 mm, and the weight is controlled at 188 grams.

As for the Ultra version, the screen resolution has been increased to a 6.8-inch 4K resolution level. At the same time, due to the corresponding changes in materials and materials, the thickness of the phone has directly become 8.2 mm, and the weight of the phone has increased to 203 grams.

.

It can be said that the overall thickness and weight of the product this time are controlled at a very perfect level.

Even the ultra-large cup version of the product is relatively lightweight according to its weight among the current mobile Android flagships and flagship large cups, not to mention that this time the product also uses more high-end materials.

.

In addition to the corresponding powerful hardware configuration, the Flexpai Rs10 series also conforms to the ultimate performance of current Flexpai products in terms of core performance.

All products in the series use TFS2.0 and Tpddr2.0 protocol flash memory and storage, which are not currently used by mainstream high-end flagships. The overall product fluency has been greatly improved.

At the same time, this series of products also specially adds a Tianxuan S12 ISP chip inside the entire product. Compared with the peripheral ISP of Tianxuan 20X5, the level of this chip's image calculation basically inherits part of its functions.

.

This can be regarded as preventing the entire series of products from falling to the same level as the current mainstream high-end flagships in terms of imaging.

As for the core processor chip, the four different models have different processor chips.

Rs10e uses Tianxuan 9X5, and the versions after the regular version use Tianxuan 10X5 processor chip.

Although this series is a flagship series, it is still obvious at the moment that they want to make a certain distinction between this product and the high-end series of their own products.

Perhaps in the future, the corresponding digital series of FlexPai will use Tianxuan 20 series processor chips.

As for products below the Flexpai digital series, it is basically difficult to find them equipped with 20 series processor chips.

The layers are clearly hierarchical, which is the current positioning of the soft party and corresponding brand development.

Of course, even the Tianxuan 10X5 processor chip has better performance and energy consumption than the mainstream processor chips currently on the market, not to mention the just-released Guozi A20 processor chip.

After all, after purchasing Tianxuan 10 series chips, most Android phone manufacturers currently use this chip in high-end flagships priced around 7,000 yuan.

Compared with these domestic Android brand manufacturers, this time FlexPai has made corresponding optimizations in the current new series, and also added specific ISP chips. Naturally, the performance of the entire chip will be better.

At the same time, this time the entire series of products will be equipped with the new generation Rsmart system for the first time. The new system will have a very good performance in terms of overall experience, and also has the dual performance acceleration functions of CPU MAX and GPU UP.

This will allow the performance of the entire product to reach its true extreme, and even provide a better gaming experience than other models equipped with the same chip.

In addition to performance, what is surprising is that this time the product is actually equipped with the same battery technology as the FlexPai 9Pro system in terms of battery, a new three-stage foldable super battery.

You must know the current battery technology. Since it will be released in the second half of this year, the regular version of FlexPai 9 does not have this technology.

This is also a major feature and advantage of the entire current series of products.

The FlexPai mobile phone Rs10e is equipped with a 6400 mAh battery, and is also equipped with corresponding 300W wired fast charging and 100W dual-split wireless charging.

The battery capacity of both Pro and regular versions is 8400 mAh, and the corresponding wired charging has been upgraded to 420W, and the wireless charging has even been upgraded to 150W three-way charging.

As for the battery capacity of Ultra this time, it has directly reached 12,000 mAh, but the corresponding wired charging speed is only 300W. Of course, this is sacrificing part of the charging power for the internal stacking of the corresponding product.

However, this time the product has also been decentralized with the dot-matrix technology of the corresponding FlexPai 9Pro series in terms of wireless charging.

However, the corresponding dot formal structure only has six large dots, which also makes the corresponding wireless charging power only 300W.

However, the dual 300W charging power is considered one of the best in the current industry.

At the same time, the entire Rs series of products this time adopts the latest multi-shunt wireless reverse charging technology in terms of corresponding reverse charging.

Among them, Rs10e wireless reverse charging supports up to 60W charging, the regular version and Pro support 90W reverse charging, and the reverse charging power of Ultra has been upgraded to a terrifying 150W.

And this time the reverse charging technology has also ushered in a new big improvement. The corresponding charging loss of reverse wireless charging is only 20%, which means that the current reverse charging can truly make the mobile phone reverse.

Charging replaces the power bank function.

And in the corresponding reverse charging environment, the temperature can be controlled within 40 degrees to ensure the battery safety and battery life of the mobile phone.

It can be said that the application of this technology can make the reverse wireless charging of corresponding FlexPai mobile phones truly a useless function.

In addition to corresponding charging, what everyone pays most attention to is image taking.

After all, judging from the overall product design this time and other hardware configurations of the product, the overall configuration of the entire current product is quite good, even better than the current domestic high-end flagships.

The Rovpai mobile phones Rs10e and Rs10 use the same Rov958 main camera wide-angle sensor.

Rov958 is a nine-in-one 100-megapixel lens that supports 11.2 million pixels and nine-in-one 100-megapixel lens. The sensor has a 1.25-inch outsole.

In the case of 11.2 million pixels shooting straight out, the unit pixel area is as high as 5.1um, and when shooting 100 million pixels, the area can reach the terrifying level of 1.7um.

This means that when this sensor takes 100-megapixel photos, it is far stronger than the photos taken by some 50-megapixel one-inch sensors in terms of pixel size and corresponding resolution.

inch sensor.

At the same time, this time the sensor is also equipped with eight-axis optical image stabilization, a large aperture of F/1.4, and is equipped with 8P lens + 1G blue optical glass.

And this time, the mobile phone images are specially co-branded. The current domestic camera brand also supports four different frame photo filters, making the corresponding photography more fun.

Although the main cameras of the regular version and e are the same, there are indeed huge differences in the other three secondary cameras.

The Rs10e version itself is a product at a lower price point. After having such a powerful main camera, it will naturally make certain adjustments in the secondary camera.

Corresponding products must save costs, so naturally it is impossible to put a certain amount of effort into all cameras.

1/2-inch 50-megapixel 133-degree ultra-wide-angle lens + 1/2.2-inch 2000x portrait lens + 16-megapixel 3.7x optical zoom lens, supporting up to 40x hybrid zoom.

It can be said that such a lens module is very common on some current ordinary flagships, but it is indeed a bit behind on the corresponding more high-end large-cup version of the flagship.

As the flagship product of the entire series, the FlexPai Rs10 has made certain upgrades in its secondary camera.

The 1/1.54-inch nine-in-one 100-megapixel ultra-wide angle lens is very similar to the wide-angle main camera, but the pixel area of ​​the direct-view unit is only 2.1um, while the area of ​​the 100-megapixel shot reaches 0.7

um.

This lens is basically on the same level as the main camera lens of current mobile phones priced around 2,000 yuan.

The other two are a 1/1.97-inch 50-megapixel double portrait lens and a 1/1.57-inch 50-megapixel 6.5x periscope telephoto lens that supports up to 65x hybrid zoom.

The performance of the lens module of the regular version of the FlexPai Rs10 is basically at the same level as the imaging level of some top domestic flagships, and is even better in some aspects.

The regular version directly adopts the four main camera configuration that is currently the most mainstream among high-end flagships of domestic brands, 100MP+100MP+50MP+50MP.

And the corresponding telephoto lens also incorporates four-axis optical image stabilization technology.

Of course, current netizens are more concerned about the difference between the Pro and the regular version. After all, the two products use the same screen, the same core processor, the same battery and the corresponding charging speed.

The only difference now may be the corresponding back cover materials. One is made of glass, and the other is made of integrated lightweight ceramics.

Of course, the most powerful thing about the Pro version is naturally the corresponding imaging lens configuration.

Even this time, the Pro and Ultra use the same main camera lens.

The Rov1179 sensor, a 1.44-inch ultra-large sensor, has a photosensitive area that is 48% larger than the 1.18-inch IMX1205 sensor on the top flagship phone released by Rice this year.

Both are also 50-megapixel lenses, and both support four-in-one direct-viewing mode.

IMX1205, in 50-megapixel high-definition mode, has a unit pixel area of ​​2.24um and a direct output of 4.48um.

The unit area of ​​the high-definition pixels of the ROV1179 sensor is 3.32um, and it reaches a terrifying level of 6.64um. This is also the largest sensor on all mainstream flagships this year.

The Pro uses eight-axis optical image stabilization this time, and the phone also uses the corresponding twelve-stop variable aperture technology, which supports changes between F/4.0 and 1.0, and supports the highest 7P lens plus 2G blue light.

Optical imaging glass.

At the same time, compared with the ordinary version, this time it has also been upgraded after retaining the layout of the telephoto and portrait lenses.

The 1/1.12-inch 50-megapixel ultra-wide-angle lens has a unit pixel of up to 1.4um. This is also a relatively powerful ultra-wide-angle lens in the current mainstream market that supports ultra-wide-angle shooting up to 147 degrees.

And this lens has been upgraded from the corresponding 7P lens to a 7P+1G lens, and is also equipped with the four-axis optical image stabilization technology used by mainstream flagships.

1.44-inch + 1/1.14-inch + 1/1.97-inch + 1/1.57-inch, a total of four main-level 50-megapixel lenses.
To be continued...