"Don't worry about this. I'll watch it here. As long as the claws of this thing are put down, I will immediately go up and make up the knife."

"As a beast, this thing is not easy to stand on both feet and cover your eyes with your claws. Under such circumstances, there is no way to respond to physical fitness, and it may even be possible to continue to consume physical energy."

"So you don't have to worry about this."

When Huang Hua spoke, my frown gradually stretched out. Huang Hua was right. In this posture, it was at least a very physically exhausting action for a structure like a beast.

In this way, it will be difficult to recover physical fitness, and the delayed time can be extended infinitely. In this way, the search time for the mechanisms here should be enough.

I slowly retreated. I could definitely trust Huang Hua's level and ability, so there was basically no need to worry too much.

I slowly walked towards the location of the coffin before the body with the stone crown. At this time, the stone coffin had become fragmented under the strong force, and the remaining burial objects in the coffin that had not been taken out were also deformed.

My brows gradually frowned. It was at this position that the corpse with a stone crown sat up.

This should be the last time I saw this corpse, and then everyone was pushed out of the tomb passage by the corpse.

However, on the way back, we did not find traces of the stone crown or any fragments. There was a 99% chance that the corpse would not be chased out at all.

The corpse is not small, and there are no traces here. Where did such a corpse go?

At this moment, my eyes suddenly flashed, and I seemed to see something under the fragments of the coffin.

I slowly stretched out my hand. The fragments of this coffin were quite large, about half a person's size, and the weight was quite heavy.

I struggled to move the stone away, and my pupils suddenly shrank.

Below this stone is a small square passage.

wrong.....

This is not a channel. You can see the structure of the mechanism linkage below this hole, and you can see the traces of the mechanism running on the edge of the hole.

This place should be a passage provided between the linkage mechanism and the coffin.

However, this shouldn’t be just such a passage, just this passage simply cannot accommodate the corpses and so many burial objects before.

Judging from the disappearance of these corpses and burial objects before, there should be a larger passage nearby.

I slowly swept along the original position of the coffin. Maybe I didn't expect that such a heavy coffin would disappear, so the mechanism below was very rough.

Combined with the structure of the channel port where the mechanism is placed, I found the location of the mechanism in less than a while.

Although it is impossible to completely distinguish the specific structure inside and the component functions of each mechanism structure, the general operating direction and connection position can still be distinguished.

Click...

As my hand pressed into the machine, I could immediately hear the slight sound made when the machine started.

The entire ground, which originally belonged to the bottom of the coffin, suddenly turned over.

At this moment, I can clearly see the operation rules of the entire mechanism. When the stone slabs on the ground are flipped, I can faintly see the steps below through the gaps created when flipping.

This means that the purpose of this mechanism is not only to turn the things below, but also to control the outlet.

The stone steps that just flashed past clearly indicate that there is still a passage below.

But at this moment, the bottom plate was completely turned over and the re-added passageway was blocked tightly.

But what should be done next?

The turning speed of the stone slab is not slow, and it is almost impossible to jump down while flipping.

Although the sound of this mechanism is low when it is started, it is obvious that the mechanism is full of power and mechanical. It is impossible to think of something stuck in the exit.

I took a slight walk around the neighborhood.

"If the mechanism in the interface is connected to the mechanism connecting the channel port, then when the object is turned, can it be done with something to destroy it?"

I put the long knife back and pulled out the bronze dagger while murmuring to myself.

When it comes to destructive power, the extremely sharp bronze dagger in his hand is naturally better.

Now there is still a lot of heat flowing in my body, and the remaining force in my body should be sufficient. Under such circumstances, it is still possible to destroy the structure of the mechanism here.

My bronze dagger can be said to be an extremely sharp and tough object. Combined with the strength in my hand, it is not difficult to block the mechanism firmly.

However, this requires time to control it very well. The time it takes about one second to start the machine and can reach it through people is about one second, and the end is about two seconds.

In other words, the interval is only one second.

If the timing is not accurate, it is difficult to ensure that a person can pass through when the entrance door rotates and stops.

This is a difficult problem, and it makes people feel very stressed just by thinking about it.

My eyes were in these two places, and I slowly walked over.

Fortunately, the starting position of the mechanism is not too far away, which is less than half a meter. If the starting position is placed farther, the timing will not be so easy to control.

I gently pressed the mechanism. At the moment the mechanism started, I could indeed see the mechanism in the mechanism linkage channel I discovered for the first time was running.

With almost no hesitation, I immediately pierced the dagger in my hand into the passage of the mechanism.

Click...

The position I chose is where a rotating gear is located and should occupy some kind of critical transmission.

The moment the dagger was pierced, it was immediately stuck in the gap between the gears.

The dagger was horizontally moved, and the operation between the two gears stopped instantly.

I held the dagger tightly with one hand, and took out a hammer and chisel from the backpack with the other hand.

After confirming the strength of the dagger card, I wanted to slowly move to a tooth of the gear as soon as possible.

This gear is about eight teeth, and on the surface it looks like the material is of some kind of special stone.

The bronze dagger can be regarded as a crucial weapon for me at the moment, and I must not give up like this.

According to my calculations, first use chisel nails to destroy each tooth of the gear.

(https:)
Chapter completed!