Now I heard that I just heard that the automobile industry in the United States, Germany and the Japanese have gradually begun to use automatic production lines to replace the large number of experienced and skilled workers they originally needed.

The reason I heard is that these high-quality and cutting-edge manufacturing technologies and control technologies abroad have carried out so well for China's confidentiality work.

Especially the Japanese, who are selfless and will not tell China about the research direction of these high-end technologies. If China wants to figure it out, the Japanese will even guide China in the wrong direction. In the world of Yunfei, install PMC

The four-axis linkage machining center of the module is the most obvious example.

Countless machinery manufacturers have spent a lot of manpower and material resources to study such a four-axis machining center. In the end, they found that it is too difficult for such a four-axis machining center to develop into a five-axis linkage machining center! Taiwan's CNC machine tool companies

, the victims are also quite serious. If it weren't for spending a lot of money to buy these third-rate manufacturing countries in Italy and Spain that purchased their bankrupt CNC machine tool companies in China, they would probably never have obtained the production technology of five-axis linked CNC machine tools.

Mainland China is even more outrageous. They were wrongly guided by foreign countries toward light machine tools with high rotation speed and high movement speed. However, because the materials cannot be supplied in China, the manufacturing process cannot meet the requirements. They can only import core components from abroad and

Materials, imperialist capitalists are all sucking people without spitting out bones. Domestic machinery companies must spend a lot of money to obtain materials and accessories that are not the best abroad. In this way, the equipment produced is due to processing accuracy.

The reason is that it cannot compete with similar foreign products!

For every medium-grade CNC machine tool produced in China, almost one-third of the profit will be handed over to foreigners! Similarly, low-grade CNC machine tools are mostly imported because of servo motors and ball screws, and they have to give the old diplomat a lot of money.

.

The lunch was solved casually with the waiter's reminder. After the meal, the two old guys pulled Yun Fei to talk about the current situation in the country and the development direction abroad. Yun Fei, Sun Lin, Situ He Yun and others talked about it until the lights were on.

The two old men left with an expression of unsatisfactory expression. He was worried that he would continue, so the two old guys pulled him to talk at night. He couldn't stand it anymore.

Although the two old men did not answer Yun Fei clearly in the end, they still told Yun Fei very seriously that they promised to ask Yun Fei's conditions to their superiors and answer Yun Fei as quickly as possible. The words of the two old men were not like Zhao Xingbang.

The official statement made Yun Fei feel a lot better about the two old men. In fact, Yun Fei does not necessarily need to obtain a patent, but it must ensure that the results of his project will not be easily taken away by others for free.

.

Otherwise, when he produces such a four-axis machining center in the future, he will face an extremely cruel Chinese-style price war. It would be like shooting himself in the foot. After all, at that time, he could not do anything to the state-owned machine tools supported by state funds.

Manufacturers compete. In the end, what he created was the ultimate reason why his company went bankrupt.

Of course, Yun Fei also told several people about such concerns. This made Zhao Xingbang impressed himself with the long-term vision of Yun Fei, a young man under 18. He only saw this pmc module

It has huge market value, but I didn’t expect the consequences that several of his factories would produce at the same time. If the patent is placed in the hands of the country, it will almost be placed in the hands of all state-owned machine tool production factories in China.

There are hundreds of state-owned machine tool manufacturers in China now, and when the market demand has not yet been fully cultivated and matured. Hundreds of machine tool companies are fighting fiercely in the domestic machine tool market because of such a product. Who has the intention to conduct research and production?

This is a disaster that is even greater than the great turmoil that was more than ten years ago! Zhao Xingbang is not an idiot, nor a novice who doesn't understand the market at all. China has now begun to move towards a market economy

In order to change, if he wants to get ahead, he must keep pace with the times, as he will definitely be eliminated by the entire society.

Pure market novices like Ma Ji were also impressed by Yun Fei's long-term vision. Others are still staring at the huge profits brought by this project, but Yun Fei has already begun to consider hidden dangers. The so-called birth in trouble and death in

Anle. Is it Yun Fei who is talking about?

After making a lot of progress in contact with the military for the second time, Yun Fei did not have time to be excited. At this time, he was spending Count CNC to conduct the final experiment with some old guys Qin Qingshan.

On May 23, at 3 a.m., Huadu CNC System Debugging Workshop.

"Master Li, please set the amount of the knife to be smaller. When turning the thread, give it a smaller amount. If you take a few more tips, we need to make a more subtle difference. Pay attention to recording the processing of each tip after the processing of each tip.

The difference between the actual size and the parameters we set, I went out to smoke a cigarette..." Yun Fei said tiredly to Li Weiguo, the system debugging technician of Huadu CNC.

Since last time I learned that Xiaoping had not made a southern tour, he has definitely had such a good opportunity now and can't be wasted anymore. It is necessary to let the chief planner of China's economic development who has always attached importance to science and technology visit Huadu CNC to inspect it.

Improving the popularity of Huadu CNC in China will be more beneficial to future development.

After Xiaoping inspects the number of flowers, Huadu CNC will definitely be portrayed as the number one independent brand manufacturer of China's CNC system. This will usher in all domestic machine tool production factories that are wild for the CNC annual machine tool market, and will also recruit Japanese

Fanuc, Mitsubishi, Mazac, and other system manufacturers with increasingly heavy market share in China. They will never want to see the rise of China's CNC machine tool industry because of its own mid-range CNC system!

As long as China can produce CNC systems, it will not be able to increase the number of CNC machine tools because the number of CNC systems is limited. Foreign CNC systems exported to China are strictly limited in quantity, and they do not want to lose China's CNC machine tools.

Almost a blank country.

In particular, mainland China is the largest market for Japan's CNC machine tools exports. Europe has Germany, a country with the highest manufacturing technology. Switzerland, the United Kingdom, France, and Italy have a large production capacity of CNC machine tools, and Japan's CNC machine tools are very difficult.

Crush into Europe; America, let alone the United States, a technology country with the world's largest manufacturing capability, has no choice but to allow Japanese devils to get involved in their markets.

Japan is close to China, and the waters are the first to get the moon. Although Taiwan, a flea that does not admit to being Chinese territory, is competing with them for the market for CNC machine tools, Taiwan is a small island as big as a sesame, and wants to fight with the Japanese bare hands.

It is undoubtedly a dream. Taiwan's CNC machine tool manufacturer has the control system from Japan, most of the steel comes from Japan, ball screws also come from Japan, and servo motors are even more from Japan, which makes the Japanese angry and pinch these spare parts

Let’s see what they use to produce CNC machine tools!

Although the Western market in China is far less than that of Japan, China-Japan relations have always been a flaw in the Japanese entering the mainland market, so mainland China also has many European and American machine tools for the procurement of CNC equipment.

The competition between the Japanese and the Western market is a real battle between gentlemen.

With CNC systems in China, although high-end machine tools cannot be produced due to material problems, it is a matter of time. If you want to curb the development of CNC machine tools in China, so as to avoid the Japanese domestic CNC machine tool market being severely squeezed and not being suppressed.

CNC system manufacturers, can they use ordinary five-axis machining centers or precision-level five-axis machining centers to mainland China and tell Chinese officials: "We will sell you whatever equipment you need, and don't do it yourself.

Well, that's too wasteful. Although your China's economy has developed a lot, there are still many people who have not solved the problem of food and clothing. Use this wasted money to improve your domestic infrastructure..." Let mainland China

Do you take the initiative to give up the research and development of high-end machine tools?

Is this possible?

The one in the world who knows the most about China is definitely Japan.

China will never put its neck into the hands of other countries and make others pinch it as soon as they want. Even the weakest Qing Empire has many wars with the devils from various countries?

Mr. Mao, who dared to face the US nuclear blackmail, said no to the Soviet Union; Mr. Deng, who forcibly forced Britain and Portugal to send back his territory, was a weak master? Especially Mr. Deng, who now attaches great importance to the development of science and technology in the entire country, would never let him go.

Some domestic systems do not develop, but agree to buy from other countries.

If you have it yourself, that's really there. Look at China, those fighter jets are so much behind foreign countries, aren't they still producing continuously? We can't compare with the quality, so we must use quantity to make up for the quality deficiency!

"Xiaoyun, why are you so anxious now? Our system is about to complete the final test, please take a good rest..." Seeing Yun Fei stayed in the workshop every day during this period, staring at the lsk9201c1

Qin Qingshan couldn't stand it when he tested, personally participated in the improvement of parameter settings, adjusting the servo system and improving the control line. Although Yun Fei forcibly occupied 40% of the shares, he was very upset.

What exactly has this guy been stimulated?

"Old Qin, the test of this lathe series system is about to be completed. Starting tomorrow, I will find a way to contact Huadu Daily to promote our system from June 1st, so that everyone knows that we have created China

The first CNC system can also control the three-axis-linked milling machine and machining center..." Yun Fei felt the coolness of the night outside the workshop, and then stood out a smoke ring and said to Qin Qingshan who was worried next to him.

(To be continued, please search for Astronomy, novels are better, updated and faster!
Chapter completed!