ps: I know that after seeing the previous experience of Xiaoping's southern tour, I postponed the time by half a year, and many readers would leave. I can't say much about this matter, I can only tell you that the old man's departure left a lot of regrets. This question will be explained later. I don't understand why everyone can accept parallel spaces and cannot accept slight historical changes.

Bing Zhihen, from the new book to now, has given me a lot of guidance and help, and has been strictly demanding. I have been trying to change myself, but now I realize that my story cannot satisfy everyone, because of the opinions of many readers, and I have never found the same feeling as before. I am trying to change my style. I am not as smooth as before in the past two days. I think it is because I have written too much every day in the past few days.

Brother Bing Zhihen’s departure made me realize that I was wrong. A person can only write a story of one person, and this story cannot be integrated into the thoughts of many people.

I hope that friends who don’t care about Hulu’s changing history will continue to support it. Especially those who read the post, I hope everyone can continue to come back to vote for recommendations. Hulu doesn’t expect your subscription, but I still hope to get your recommendations.

The two old guys knew that if they did not agree with Yun Fei's opinion, Yun Fei would never cooperate with them. After all, the country has hurt their family too deeply. This young child is very resistant to these things. However, he has mastered the technology urgently needed by the country, and in the end he had no choice but to find an old man who retreated behind the scenes. The old man has always attached importance to the development of domestic science and technology, especially those high-end technologies that have had a great impact on various industries in the country. Now he heard about the situation of Yun Fei, and Long CNC has been hyped in China, especially many officials who have been engaged in machinery for their lives have come to the old man for support, and they want to nationalize this system!

The old man was worried that these guys would make trouble, so he advanced the Southern Tour by half a year. He had to make a gesture to let those guys who wanted to jump up and bite when they saw the credit and understand their attitude. Situ He Yun and Sun Lin said that the CNC year system was too important. Especially the mass newspapers that the old man read every day, which elevated this to a height that concerns the development of the entire country's machine tool manufacturing industry. How can the old man not pay attention to it?

The old man finally left the words to Yun Fei because he was worried that talents like Yun Fei would be in trouble in the future and left China in anger. China has lost too many talents abroad in recent years.

The elderly are more clearer and more clearer than anyone else about the situation in China. In order to pursue the development of the national economy and change the poverty and backward situation of the entire country in recent years, the elderly are more indulgent for many people who are able to do practical things seriously, but they did not expect that in the end, they became more and more excessive.

The elite talents from countless countries never come back after leaving, and the elderly are powerless about these things. Although they are unwilling to come back after going abroad, it does not mean that they do not love their motherland, the country's environment, and the country's officials make them scared.

Many times, the central government's policies were originally very good, benefiting the country and the people, but when they arrived, they were distorted by local governments because of their own selfish desires. After the central government discovered it, although it could be reversed in time, the impact could not be eliminated. He was old and had no energy to deal with these matters. He could only do his best to devote his life to this country. He loved it deeply and retained as many talents as possible.

Yun Fei really doubted why this old man had such great expectations for himself. The old man is 88 years old this year. In his original world, the old man will leave the world in less than five years. In less than five years, can he create a real four-axis linkage machine tool? Can the old man live longer than his own world?

Simplified in the heart of the emperor!

The old man visited Huadu CNC until after he finished his itinerary, his views and itinerary of his trip were gradually revealed.

Flowers appeared in the sight of the entire Chinese people again. Countless people know that in China, except for a company that has said "amazing" many times, Comrade Xiaoping has always attached importance to the development of science and technology. He has said "amazing" countless times. The amazing CNC machine tool control system he said is absolutely amazing.

Especially when the old man left, he said something about Yun Fei. After the officials following the old man, Yun Fei, a young man who was only under 18 years old, has been remembered in his heart by many people in power.

Most domestic machine tool manufacturers have sent purchasing personnel to Huashu to contact the procurement business of CNC system. According to Huadu CNC's current production capacity, orders have been scheduled for five years and are still increasing.

"From now on, we will give up the domestic CNC transformation business of ordinary machine tools. We need too many skilled technical workers. We are a company that produces CNC systems. Now we must focus on the localization of all spare parts..." Yun Fei said to Hua Shuzhong shareholders who looked worried.

There were several huge photos neatly hanging behind Yun Fei, all of which were taken by the staff he accompanied when he was visiting.

Now, two months have passed since the elderly visited Huadu CNC and Huadu CNC. The production of Huadu CNC is now extremely busy. The current skilled workers work more than fourteen hours a day, but orders usually come to snowflakes are still a drop in the bucket. System debugging personnel are not qualified for those without any experience. They must go through a lot of training to be competent.

The dust-free assembly workshop has low requirements for workers, and it also requires a lot of training. The welding of electronic circuits is not without experience, incomprehensible, and ordinary workers can complete it. In this era, there was no automatic production line in the world that was later generations. Moreover, the assembly of the flower system, such as the motherboard, is customized in Taiwan's electronic factories. The annotations are codes or English abbreviations. After all, the Chinese characters are too large and written too small and cannot be identified. Workers with too low education or have not been trained for a long time cannot understand the various annotations on the motherboard.

"Give up the modification market?" Zeng Hongqi was very confused about Yun Fei's words.

You should know that China's CNC machine tools are now extremely large, and Yunfei is going to give up a big cake! Several shareholders of Huadu CNC are very reluctant. Their lathe system is priced at RMB 38,000, which is half cheaper than similar products imported from abroad; the milling machine system is priced at RMB 58,000, which is two-thirds cheaper than foreign systems! If Huashu company provides systems and provides accessories for CNC transformation of machine tools, these prices will be added to RMB 20,000. And half of the 20,000 yuan is profit.

"We must give up. Now our technicians have too big gap. We will consider this issue until we have enough staff in the future. After eating meat, we have to leave some soup to others, otherwise we will now face the siege of the entire foreign CNC system manufacturers and will also be siege by domestic machine tool production systems!" Yun Fei said coldly.

These people don’t have a memory increase. They can’t tell the difference between the east, south, west and north when they see profits. No wonder the world’s spending power is so strong that they can’t organize the entire industry.

"Also, the low-end system you originally designed will improve those defects and invest in the market. We must seize users in the low-end market. In China, the number of low-end users is the largest. Now our system is too high and there is no way to reduce the price. Many customers who don't use many functions will give up on us because of price issues..."

Yun Fei said firmly to the people.

As Huadu CNC gradually grows, foreign CNC system manufacturers, especially Japanese major companies, Fanuc, Mitsubishi, and Mazak, have gradually begun to sell mid-range CNC machine tools control systems to China, and low-end systems have gradually decreased prices. However, the price reduction of the low-end CNC systems they sell in mainland China is not large. They are only a few thousand yuan cheaper than each of the systems of Huadu CNC.

In this era, many people believe that the moon abroad is rounder than China. Things abroad are definitely better than China. In addition, the brands of companies that have always dominated the Chinese CNC machine tool market are deeply rooted in the hearts of the people throughout China.

Yun Fei, who came from later generations, is quite clear about the overall national character of the Chinese nation. For example, the brain-dead tribes, the Hakka, Korean, and Hakka and Japanese tribes that were criticized online in later generations. In fact, it is not to say that Yun Fei has more national self-esteem than others, but he is still quite unbearable to these.

Let’s talk about Japan’s manufacturing industry. In the high-end market, it is indeed much better than China’s. Although a certain product produced by a Chinese manufacturer can compete with its foreign counterparts, this manufacturer has no way to compete with foreign manufacturers, just because China’s counterfeit strength is too strong. No matter how high-end product you are, the Chinese who can rank among the top three in the world will definitely be copied through hardships. At most, a trademark with a very subtle difference will leave you with nothing to say.

"Let's find a way to contact domestic electronic factories and try to complete the domestic production of major modules in our system. Now foreign colleagues and people feel our pressure and have begun to reduce prices. If we wait for more models of our products to be derived and domestic machine tool manufacturing companies launch our own CNC machine tools, I think our domestic CNC industry, whether it is the system or the machine tool market, will be in a bloody storm."

Under the attention of the old man who came to Huadu CNC inspection, the military had agreed to Yun Fei's request. The negotiations between Zhao Xingbang and Germany had ended. He bought three German ep6 four-axis machining centers for a price of 1.8 million US dollars per unit. The remaining hundreds of thousands US dollars were originally intended to invest in Yun Fei's new factory, but they demanded absolute control, but Yun Fei refused to drop it firmly.
Chapter completed!