Font
Large
Medium
Small
Night
Prev Index    Favorite Next

Chapter 100 When the modification is in progress

After quickly seeing through the nature of the huge profiteer in the City of Machinery, Lin Yuan was no longer interested in checking the finished goods that looked majestic. What a joke, the moisture inside was definitely more than 1,000%. Since that is the case, he certainly would not be the sucker.

With this enlightenment, Lin Yuan even lost interest in those semi-finished parts. He paid attention to the raw materials directly because he could not guarantee whether these parts were filled with water. Moreover, he believed that at the same price, he could actually buy higher quality raw materials and then make them into parts by himself. Wouldn't that be better?

This time, he needs a lot of materials that have high reinforcement and good average transmission rate of Civic, so if you waste more time and work hard on these small details, the final result will definitely not be too bad.

However, as a super profiteer, how could the City of Machinery would not have thought of this situation? After browsing, Lin Yuan found only a hundred kinds of raw materials, and they were all items that were either of very low-level or required precision processing and special craftsmanship, and there was no such fine raw materials as he wanted.

There is no doubt that this is another terrible monopoly. All the sub-bases in the Galaxy produce raw materials that are sold to the City of Machinery, and then through a certain link, they finally appear on the trading platform. It goes back and forth, and it is more than a thousand times the profit!

The citizens of this mechanical city really live in dire straits!

Lin Yuan thought maliciously.

Unable to find the raw materials needed, Lin Yuan had to spend more mechanical coins to purchase semi-finished parts, which are basically used to replace mechanical legs, mechanical arms, and parts used to carry the walking system. Specifically, these parts are of relatively low-level ones and are also careless in quality. According to parameters, the strengthening degree can reach more than 18 points.

However, even so, this pile of parts that seemed to be small had consumed all the 440,000 mechanical coins in Lin Yuan's hand, and some of them were not even able to be purchased.

This made Lin Yuan hate the big profiteer in the City of Machinery more and more.

But he has no choice for the time being.

After quitting the trading platform, Lin Yuan immediately began to transform, starting with the most basic mechanical legs. This time, the mechanical legs he transformed remained bounced, but they would not be in a zigzag shape, and they would not be too thin.

The core of this mechanical leg is no longer the simple physical spring mode in the past, but has been changed to an energy conversion catapult device by him. In other words, it is more powerful and powerful.

The two energy conversion catapult devices were purchased by Lin Yuan from the trading platform, with a unit price of 50,000 mechanical coins, which is considered a sucker among all the parts he purchased. This is also impossible, because at present, he cannot master such complex parts transformation and assembly.

The power of each catapult device is 15. If converted into an earth unit, the catapult power emitted is about 2,000 kilograms, and the two catapult devices are 4,000 kilograms. Of course, this is not the entire explosive power of his mechanical legs, because the catapult device is just to assist the mechanical legs to bounce. The real power explosion still depends on Lin Yuan's energy engine. For example, the knee-to-collision skill attack is that before the transformation, it can easily reach 5,000 kilograms to 8,000 kilograms of impact force.

However, the complexity is not here, but the compatibility of the catapult auxiliary device with the intelligent brain and the control of each catapult action, because it is impossible to maintain the maximum power forever, wouldn’t it become a mechanical rabbit again?

Therefore, if you have to lift weights lightly, you should be no different from walking normally, or dodge in complex situations, including ejecting in which direction and how big the force is, this is a very complex calculation process. After all, for melee combat, every centimeter of error may lead to death.

The control of this link is the key core of these two catapult devices. According to the explanation parameters of this thing, it is possible to ensure that at a 0.05-second average reaction rate, thirty catapults of different forces and angles are made every second, which sounds very awesome.

But Lin Yuan was not satisfied because in a melee battle, especially since he had chosen to use bounce as the main combat instinct, then what he needed was not a simple mechanical bounce, but an extremely flexible way of action. Whether it is bounce or other actions, it must be ensured to be the fastest and most accurate, so that he can maximize his combat effectiveness.

However, for the time being, Lin Yuan does not understand the specific structure of the catapult device, nor does he understand how this thing will be in use. He plans to modify it himself after a while.

With these two ejection devices, the power of the mechanical legs has been solved, and then the specific appearance is the specific appearance. This time, Lin Yuan considered the load-bearing capacity, within 200 kilograms, and the normal bounce height and running speed not lower than 50 kilometers per hour.

In addition, some take-for-nothing appreciation.

Finally, the rough appearance of these two mechanical legs becomes three-stage, about one meter fifty meters high, and the first mechanical legs from top to bottom are 70 centimeters. The main function is to support, and includes the storage tool box, the support point of the third and fourth mechanical arm, and the support point of the second mechanical form.

The second section is sixty centimeters, purely serving as a supporting role, and the third section is twenty centimeters, mainly the two catapult devices, with an overall strengthening degree of 18 points.

After the assembly was completed, Lin Yuan repeatedly confirmed that there were no loopholes, so he used two transformation points to connect these two mechanical legs to his waist. This is a very efficient way to use transformation points. Otherwise, if the transformation points were used to transform these two mechanical legs throughout the process, it would probably take at least ten transformation points to achieve this effect.

Of course, Lin Yuan can also not use these two modification points, because his assembly is already perfect and can be used directly with the entire mechanical body.

However, there is a problem here, that is, the problem of adaptability running-in. Even if the newly assembled mechanical components are perfect, it will take a certain amount of time to integrate into the entire mechanical body system.

It’s like these two mechanical legs. If Lin Yuan doesn’t use the transformation point, then he will need at least a whole year to train continuously before he can finally get in with the entire mechanical body. If he uses the transformation point, there is no need for such troublesome running-in.

After the two mechanical legs are transformed, the first and second mechanical arms are transformed next.

These two transformations are relatively simple, because before, Lin Yuan had already transformed them almost. He only needed to install three movable joints and a pair of multi-functional robots on these two robot arms.

These three moving joints correspond exactly to the shoulder joint, elbow joint, and wrist joint, but this is not a human arm.

In Lin Yuan's design, the three joints of the robotic arm must first withstand huge impact force, because this is the most easily damaged place. Secondly, it is the problem of flexibility. Therefore, the range of movement of the shoulder joint is 320 degrees, which is quite sensitive. In fact, he once thought of designing it as a 720 degree all-round joint, but such sensitive joints are not strong enough, and to achieve that level, the transformation required is much more complicated.

As for the elbow joint, the range of movement of the shoulder joint is 200 degrees, which is considered to be average.

The most complicated thing is that it belongs to the wrist joint, which is 360 degrees of motion range, and is as close as possible to humans. At the same time, an adjustment has been made. While being able to hold the hunter's long sword, a laser pistol can also be used.
Chapter completed!
Prev Index    Favorite Next