Monday, steel rolling mill auditorium.

"I declare that the mid-year work summary meeting and workers' representative meeting of the steel rolling mill, as well as the big study and big discussion publicity and implementation meeting are officially opened!"

"Wow~!"

As Yang Fengshan, who presided over the meeting in front of the main stage, announced that the meeting had officially begun, the audience burst into thunderous applause.

Sitting in the row in front of the main stage are Dong Wenxue, Li Huaide, Cheng Kaiyuan, Gu Weijie, Yang Fengshan, Yang Yuansong, Feng Daozong, Xiong Benzheng, Xue Zhifu, Jing Yunong, and Nie Chenglin.

Sitting in the back two rows were the heads of various offices in the steel rolling mill, as well as several comrades from the working group.

Sitting under the stage were representatives of all factory staff, workers' representatives, and cadres at deputy section level and above.

This mid-year meeting was held with several meetings at the same time.

The agenda of the meeting mainly includes:

Day one:

1. Read the opening speech of the meeting.

2. Play the G song.

3. Adopt the list of working groups for review by the conference.

4. Comrades of the working group read out the decision of the superior.

5. Listen to and review the mid-year work report of the factory management committee and make relevant resolutions.

6. Listen to and review the mid-year work report of the factory office and make relevant resolutions.

7. Listen to and review the mid-year work report of the Disciplinary Supervision and Administration Commission and make relevant resolutions.

the next day:

1. The review groups of the conference went to the branch venues to listen to and review the mid-year work reports of each department, and participated in group discussions on the work reports.

2. Instructions on the arrangement of replacement personnel for the two committees.

3. Announce the recommended list of replacement members of the two committees.

4. Conference selection method.

5. List of general vote-takers and scrutineers.

Day three:

1. Selection method through the conference.

2. Pass the list of scrutineers and general vote-takers.

3. Select the members of the two committees of the replacement factory.

4. Convene the congress committee meeting and the disciplinary supervision meeting to select replacement members.

5. The plenary meeting announces important work.

6. Convene a general meeting of the factory to publicize and implement the big study and discussion activities.

7, closing.

According to the agenda of the meeting, the factory director Yang Fengshan who presided over the meeting announced the opening of the meeting and announced that Yang Yuansong, secretary of the steel rolling mill, would read the opening speech of the meeting.

The venue was very large, and the amplification equipment on the main stage was not very good. Yang Yuansong's words were somewhat distorted after amplification.

However, because the venue is large and there are many people, amplification equipment is necessary.

The venue was very quiet, everyone was listening attentively to Secretary Yang Yuansong's speech.

At this time, workers have a strong sense of ownership. Apart from cadres, most of the people who can come here today are representatives and workers.

Everyone attending the meeting today is fulfilling their respective obligations and rights, and they are also eligible to participate in the agenda of the following meeting.

While most people's eyes were focused on Secretary Yang Yuansong's position, someone looked from time to time to the seat between Deputy Secretary Gu and Deputy Director Li who were sitting in the first row of the main stage.

Sitting there was a strange face that I had just seen today, and the position where he sat had to be noticed by those who were interested.

Generally speaking, there must be an odd number of factory team members, so that there will be no even numbers in the voting.

Of course, it's not absolute.

This situation is currently occurring in the steel rolling mill. If Feng Daozong is not included as the representative of the working group, there are ten leaders in the mill.

It was obvious that the new face sitting in the first row of the main stage was not coming from above to attend the meeting.

Generally speaking, the order of seats on the main stage is arranged in a regular manner, divided into single and double seats.

Just: 9,7,5,3,1,2,4,6,8.

Even is: 9,7,5,3,1,2,4,6,8,10.

Many things can be seen from the seating arrangements at the venue. For example, the number of factory leaders is now an even number, and with the addition of Deputy Director Feng of the working group, it happens to be an odd number.

For example, the new-faced person with a name tag that says "Cheng Kaiyuan" is sitting in position 7. What does this mean?

To his right is Li Huaide, and it is self-evident what he represents.

Those who had received the inside information early naturally understood what this meant, while the representatives sitting below were still guessing and thinking according to the meeting agenda.

You can't tell anything from the faces of the leaders on the stage. They are either looking at the materials, drinking water, or looking at the people below.

After the secretary finished his speech, Yang Fengshan waited for the applause to gradually subside before he stood up, stood up, and sang the G song.

This was a necessary agenda. Li Xuewu stood up from the middle seat in the second row. His seat was on the main stage, with Gu Weijie in front of him.

After standing up, Li Xuewu couldn't help but turn his attention to position 7, the new leader named Cheng Kaiyuan.

He is not tall, it can be said that he is a bit short. Standing between Li Huaide and Gu Weijie has no height advantage at all. He is probably only a little over 1.6 meters.

Not thin, but not fat either. Maybe because of my short stature, I look a little round.

The hair is parted on the side, which is the same as Li Xuewu's current thunderbolt hairstyle, but the hair is not as thick as Li Xuewu, and it is not very prominent when it is attached to the top of the head.

At the end of the performance, with a scuffing sound of chairs, everyone in the venue sat down again, and the order gradually returned to quiet.

"Now announce the list of conference review working groups~"

Yang Fengshan's voice today was very powerful. It spread through the loudspeaker to the entire venue, and Li Xuewu could hear the echo.

The list of the conference’s deliberation working group is actually the list of members of the committee. Today is not the year of the Congress, so today’s meeting does not include the content of the Congress.

However, as usual, there is still a list of the presiding team, but now it is replaced by a list of the review working group, and the meaning is the same.

When the list was read out, Li Xuewu did not hear the name Cheng Kaiyuan, which meant that he was not included in the mid-year meeting of the factory this time.

When the comrades of the working group read out the superior's orders and decisions that followed, everyone got to know the new face on the main stage.

"Today, the Ministry of Human Resources should attend the meeting, but I am in charge of personnel work in the Ministry, so the leader entrusted me to be the introducer to Comrade Kaiyuan."

This chapter is not over yet, please click on the next page to continue reading! It was Feng Daozong's turn to speak. He sat in seat 2 as the leader of the working group and represented the superiors.

First, he gave an explanation of the situation where he was to read out the orders from his superiors today. Then he coughed, looked down at the materials in his hand and began to read out the orders and decisions.

"With the approval of..., the Disciplinary Supervision and Inspection Commission launched an investigation into the serious violations of... by Deng Zhiwang, a member of the former steel rolling mill... and deputy director. After investigation..."

"After...discipline supervision...meeting study and submission to...approval, it was decided to give Deng Zhiwang the sanction of expulsion...; the supervisory committee will give him the sanction of expulsion from his post; confiscate his illegal...income; and transfer him to...

"

"After...research and decision: appoint Comrade Cheng Kaiyuan as the executive deputy director of the steel rolling mill, and appoint Comrade Dong Wenxu as the deputy secretary of the steel rolling mill committee..."

Feng Daozong's speaking speed was not fast, but the intensity of his words was obviously not as strong as Yang Fengshan's, so the amplification in his ears was also intermittent.

However, the key content has been heard clearly. First, the decision on the treatment of Deng Zhiwang, the former deputy director of the steel rolling mill, was read out, and then the appointment of the two cadres was read out.

Unlike in local areas, the deputy secretary in the factory is appointed, as is the deputy director.

Of course, the same goes for the executive deputy.

This time, the authorities made great efforts and directly filled all the positions that were previously lacking in the steel rolling mill.

However, it is unclear whether this result was requested by the steel rolling mill or was arranged by the superiors.

After reading out the order, Feng Daozong also started his speech after taking a sip of tea.

First, he criticized Deng Zhiwang's problem, and then extended the problem from Deng Zhiwang to the issue of work discipline, emphasizing the discipline of cadres in the steel rolling mill.

Then, after talking about lessons learned from the past, he began to introduce the two protagonists in the order he just read out.

"No need to introduce too much about literary comrades, they are representatives of young cadres in our factory."

Following Feng Daozong's words, Dong Wenxue stood up to the applause and showed his face to everyone present, and then sat back down.

Feng Daozong said that no introduction was needed, but he simply read Dong Wenxue's resume according to the materials and gave a basic introduction.

"Comrade Literary started working in 1953. He has a university degree and majored in management. He has worked in many departments and then worked in a factory... Now he is..."

Dong Wenxue kept a very calm attitude when Feng Daozong introduced himself, and his expression did not change because he was at the front desk.

After introducing Dong Wenxue, Feng Daozong gestured to Cheng Kaiyuan, who was sitting not too close to him, and introduced: "Comrade Cheng Kaiyuan started working in May 1999. He has a university degree, majoring in metallurgy, and has rich management experience in the steel industry..."

Li Xuewu heard that the new deputy director introduced by Feng Daozong was from a major, and he couldn't help but look at Yang Fengshan's position and Nie Chenglin's position at the edge.

What is this?
To be continued...