Meaning
"When focusing on a certain research, the explanation will enhance other people's inspiration acquisition, and at the same time, give back the correct understanding and thinking of inspiration..."
"Four times the inspiration, 100% feedback."
After acquiring the new ability, Wang Hao carefully read and understood. Comparing "The Gift of Teaching" and the effects of its use, he quickly understood the effect of "The Gift of Scientific Research".
What needs to be noted about this ability is the situation in which it works——
Focus on a certain study.
‘Focus on research’ is definitely not a purely teaching setting, not done in a classroom, but a place like a laboratory, project team, etc., where a group of people do research and development together.
Of course, the main restrictions are the participants and the content, not the venue.
"The Gift of Teaching" can also play a role in this situation. The difference is that "The Gift of Teaching" mainly gives back knowledge and thinking, and the effect is to increase other people's understanding of the explanation content.
"The Gift of Scientific Research" gives back inspirational thinking and understanding, and the effect is to increase the rate at which others can obtain inspiration.
The difference is knowledge and inspiration.
Knowledge is the foundation. Even if the feedback is thinking, it is also thinking about knowledge.
Inspiration is specifically for scientific research. There are many experiments, studies, etc., and there are some key points that most people involved in the research could not think of. Only one person thought of it, and he was not sure whether his idea was correct.
This is inspiration.
To take the most direct example, when observing space pictures taken by satellites, some astronomers can find a special one among the bright spots, but most people may not notice that special point, or feel that that point is different from other points.
No difference.
Even an astronomer who pays attention to special bright spots may not be able to confirm his idea. He may feel that the idea is sudden, but after thinking about it carefully and deeply, he feels that there is nothing special about that point.
This could lead to missing important discoveries in astronomy.
The astronomer who noticed the special bright spot activated an inspired idea at that time, but he was not sure whether his idea was correct.
In this case, the special highlights and related thoughts will be fed back, because the system will help judge whether it is correct.
What's noteworthy about "The Gift of Scientific Research" is that it increases other people's inspiration acquisition, which directly increases it by four times.
This value seems amazing, but if you think about it carefully, it is difficult to say whether the effect is good or bad.
Inspiration is mysterious and mysterious.
In normal life, some people may suddenly have a flash of inspiration, and think of something that will make great progress in research and development.
Some people keep working hard on research, but there is no inspiration at all, and all their efforts are in vain.
In this case, it is meaningless no matter how much inspiration gain is improved.
"However, it seems helpful to guide students next semester. Students also need to do research and complete thesis. In the process of guidance, if you can get more inspiration, maybe you can truly complete the transition from study to scientific research..."
The study of graduate students is the transition from study to scientific research, and they must adapt to the transition process from study to independent research.
The knowledge content possessed by graduate students has reached the top of a certain field, and they have begun to try to make breakthroughs at the top of the field.
If it can give students more inspiration and know how to think, research, and lead students, the effect will definitely be very good.
Wang Hao understood the effect of the new ability, but he still had to practice it.
Now is not the time for practice.
Giving research and development lectures at the Institute of Aeronautical Materials is almost equivalent to a teaching setting, rather than doing a certain research together with other people.
In the afternoon, the speech continued.
It took Wang Hao more than two hours to complete the rest of the explanation. The entire explanation was very boring, and he couldn't find any fun in it.
The process is to explain how to use new methods to analyze each process data.
However, everyone listened very carefully, because it was the field they studied, and there were some contents worth thinking about.
They kept listening to the explanation and took very detailed notes. Even the people in the Polymer Materials Laboratory could feel Wang Hao's in-depth research and felt that they had learned a lot of new things.
Some people couldn't help but think, "Although the lecture cost 30,000 yuan, it doesn't seem to be a big loss. You can't hear these things elsewhere."
Of course, some think it is expensive.
For example, Wang Jiming was still thinking about the high lecture fee of 50,000 yuan per person, and he couldn't listen at all while sitting in the audience, feeling like his heart was dripping with blood.
Finally, Wang Hao finished speaking the last part, stopped talking and quickly took a sip of water, and continued, "That's it. There is too much content. If you don't understand anything, you can watch the entire video again."
After Wang Hao finished speaking, he couldn't wait to walk off the stage.
He felt really tired and couldn't help but sigh, "It's really hard to make money."
"Five hundred thousand, I've been talking for so long...but it seems to be okay..." Thinking of getting 500,000 yuan in lecture fees, he suddenly felt better.
…
The lecture is over.
Most people dispersed while discussing.
Cao Dongming, Qu Shigang, Wang Jiming and others accompanied Wang Hao to the lounge. They drank tea together, chatted and took a rest.
Wang Jiming finally found an opportunity and invited Wang Hao to visit the Wuhan Iron and Steel Research Institute. "Our Wuhan Iron and Steel Research Institute has very advanced research and development equipment and supporting facilities. It is the most cutting-edge steel materials research institute in the country."
"Our branch in the capital is also one of the centers, with experimental simulation capabilities focusing on numerical simulation, physical simulation and pilot testing of the entire steel production process..."
Wang Jiming came up with an introduction.
Wang Hao was not interested at all. He just wanted to go back to the hotel to rest, have a good sleep, and leave by plane the next morning.
When he found that Wang Hao was not interested, Wang Jiming was a little anxious and immediately signaled Ding Zongquan with his eyes.
Ding Zongquan had the urge to curse others. He followed Wang Jiming all the time, trying to reduce his presence as much as possible and barely said a word during the whole process.
The result...let yourself say it?
Wouldn't this be counterproductive?
Ding Zongquan decided to put more effort into the 'reaction', "Our Wuhan Iron and Steel Research Institute is still worth a visit. We invest a lot in research and development, and experimental research is carried out every day, but the operation room behind it is always very noisy...
…”
He added this sentence just to prevent Wang Hao from going.
After hearing this, Wang Hao immediately asked, "What experiments are there today?"
Ding Zongquan suddenly felt confused. He felt that Wang Hao would not pay much attention to what he said. But he knew that this young man had a bad temper and had no respect for his elders.
I challenged myself last time in the metal laboratory of Xijing Jiaotong University.
Why are you still asking now?
Ding Zongquan could only explain with a straight face, "Twin-roller casting and rolling technology experiment."
Wang Jiming discovered that Wang Hao was interested in the new experiment and immediately explained, "It is an experiment to perfect the double-roller casting and rolling technology. This technology is still cutting-edge in the country, but the products produced by the relevant production lines are inferior compared to other technical products.
The rate is a little high, we have been improving this technology and invested a lot of money."
"We also have cooperation with other metal-related laboratories. The alloy laboratory of Donggang University is a technical cooperation. They will provide relevant data, and we will conduct experimental verification, and the progress is still very smooth."
"Professor Ding is in charge of this cooperation project, this technology..."
Wang Jiming spoke patiently and explained in great detail.
Twin-roller casting and rolling technology is a new steel manufacturing technology in the 21st century. It was jointly developed by Amerikenuco Steel Company, Japan's XIHI Group and Austrian BHP Company.
This technology is ‘thin strip casting and rolling’.
China only had a complete double-roller thin strip casting and rolling production line a few years ago, and Wuhan Iron and Steel's first production line has just been completed and accepted, but it has also become the sixth industrially operated thin strip casting and rolling production line in the world.
The process of twin-roller casting and rolling technology is very simple. The liquid steel is injected into the molten pool formed by the side sealing plate and two copper casting rollers rotating in opposite directions through the flow distribution system. The cooling water passing through the copper rollers melts the molten steel.
The heat is taken away. After the molten steel solidifies and is squeezed from the gap between the two rollers, cast strips of a certain thickness can be directly and continuously produced. After hot rolling one after another, thinner hot-rolled strips can be produced.
Thin strip steel.
If it can be explained simply, molten steel is poured into the mold, cooled and extruded.
Double-roller casting and rolling is just a technical implementation method.
When Wang Jiming talked about the new technology, he became energetic, "This technology is very good. Our production line used to be at least 400 meters long, but now it can be shortened to 50 meters."
"And there are fewer processes, lower energy consumption, less emissions, and the production process is faster and more flexible..."
To be continued...