Chapter 445 How big is the technological gap? Sky Monkey and precision guided missiles(1/2)
f-rays are a research discovery by the annihilation force field experimental group.
Later, f-rays were separated to form a new experimental group, which was directly under the leadership of the military and science and technology departments. The purpose was to study f-rays as a technology that was different from strong annihilation force fields.
When a large amount of money is invested in the research of a single technology, realizing the application of the technology is naturally one of the ultimate goals.
But until now, F-rays are still only a laboratory technology.
There are two main reasons. One is that the cost of the equipment is too high and the reliability and safety cannot be evaluated. The other is that the stimulation demand is high but the accuracy is too low.
With the basic support of experimental DC anti-gravity technology and granular materials, the reliability and safety of F-ray generating equipment have been greatly improved. Coupled with the built-in micro nuclear reactor, F-ray generating equipment needs to operate 24 hours a day, all day long.
Together, several aspects have solved many problems, making f-rays somewhat practical.
However, the problem of accuracy has not improved.
The excitation port of f-rays cannot be adjusted instantly and can only be emitted in one direction, which makes the technology seem useless.
If the accuracy problem can be solved, the practicality of F-rays will be greatly increased.
Due to the bulkiness of the equipment and other problems, the excitation port cannot be adjusted in real time. At most, we can only open a few more excitation ports. However, F-rays propagate in a straight line, and the direction that can be covered is still very limited.
Now there is a new solution.
If fan-shaped f-rays can be emitted, its coverage will be greatly increased. As Liu Yunli said, "At worst, it can also be used in the field of air defense."
After getting Wang Hao's clear answer, Liao Jianguo and Liu Yunli were very excited. They found a new research direction, and they directly increased the coverage area of f-rays. If they can research it, they can start to demonstrate that the manufacturing can be put into service.
F-ray weapons.
This also achieves the purpose of realizing the application of F-ray technology.
Sector-type release rays is a technical idea, and it is indeed a very good research direction, but it is not easy to really study it. For the time being, we can only follow the idea and study it slowly.
They have too much work.
Now the main direction of the experimental group is to improve micron-level granular material equipment so that it can produce higher intensity f-rays.
At the same time, they must also cooperate with experimental research on nuclear fusion demonstration.
Some equipment in the experimental group also needs to be upgraded and maintained. Every day is busy and the work seems to be endless.
Liu Yunli is the technical leader and main force of the experimental team.
He was so busy all day that he was dizzy.
Even so, he felt very happy, because f-rays were not only a confidential technology, but also gradually had practical value and were directly linked to many aspects of research.
This illustrates the development of technology.
As a veteran figure in f-ray research, he naturally hopes that F-ray technology can have more applications and develop more.
the other side.
Wang Hao thought Liu Yunli's idea was good because he had never thought about turning F-rays into 'F-fans'.
This idea is very advanced.
Whether the 'F fan' can be successfully excited depends on the intensity and internal energy support. It turns out that the duration of f-rays is very short, so it is naturally impossible to successfully excite fan-shaped rays.
Even with the support of an internal micro nuclear reactor, it is still unknown whether it can be realized.
From a theoretical analysis, even if it can be successfully released, because the coverage area is greatly increased, the distance affected will naturally be greatly reduced.
"The experimental team has proven that the duration of F-rays is positively related to the internal energy intensity."
"If it were a fan, the energy intensity required would be too high."
"If you want to achieve the level of releasing f-ray sectors, the equipment must have a built-in strong energy source to support...nuclear fusion..."
Wang Hao increasingly felt the importance of nuclear fusion technology.
He shook his head slightly and continued to read the experimental reports related to the nuclear fusion demonstration. Wang Baichuan had already submitted the report of the first experiment.
Wang Baichuan's experiment was a great success.
This is very important for the demonstration of nuclear fusion, and has very critical significance and value. Their experiment proved the feasibility of the deuterium-deuterium reaction and solved two demonstration problems at the same time.
One is for ignition and the other is for materials.
Although this is the original idea, technical demonstration cannot be imagined out of thin air, everything must be based on experiments.
Wang Hao is also full of expectations for the research on nuclear fusion, "The demonstration will probably take more than half a year."
"If you invest in design, manufacturing, and later debugging... one year, there is a high probability that it will not be completed. Two years... maybe?"
He was a little unsure.
When Wang Hao was deep in thought, there was a knock on the office door. He raised his head and said softly, "Come in!"
The person who came over was He Yi.
He Yi and Wang Hao said hello, came over, put the tablet on the table, and said, "Let's see if this will have any impact on us?"
Wang Hao looked at it with confusion.
That is the content of the new issue of "Journal of Frontier Physics". It is the latest research of the International Annihilation Theory Organization. They used magnetic interference research on strong annihilation force fields to successfully create a cylindrical strong annihilation force field that is free from magnetic forces.
.
There is also a photo in the research report. You can clearly see that outside the circular gray space, there is an abrupt cylindrical dark zone.
Overall, it looks like there is an extra handle.
Yurayin Novotny also appeared in the report. He introduced the latest discovery, "Strong annihilation force fields will be directionally repelled by magnetic fields."
"This is a special phenomenon of the influence of magnetic fields on strong annihilation force fields. We call it 'magnetic interference'. We have been studying the phenomenon of magnetic interference."
"After countless demonstrations and experiments, we successfully made the strong annihilation force field escape from the original field force range, and found that it will extend outward in a fixed plane..."
This chapter is not finished yet, please click on the next page to continue reading the exciting content! "At the same time, we measured that the strength of the field force also increased slightly..."
"After discussion, we all believe that this discovery is very important. One is related to the special properties of the strong annihilation force field, and the other is probably related to material manufacturing technology."
Yurayin Novotny did not mention Annihilation Technology Company, but only talked about the creation of external field forces by magnetic interference. It may be related to material manufacturing technology, but after seeing the research report, he can directly think of the manufacturing of magnetized materials.
question.
The strong annihilation force field created by the International Annihilation Theory Organization is just a thin layer of the strong annihilation force field that is eager to superimpose force field technology.
With thin layers, the magnetization effect is naturally poor.
If the material is allowed to pass through a thin layer of a strong annihilation force field, it will be impossible to achieve complete magnetization of the entire material.
The magnetized material manufacturing technology mastered by Annihilation Technology Company is incredible to scholars engaged in research on strong annihilation force fields. They do not understand how to manufacture magnetized materials on a large scale through thin layers of field force.
Now……
Yurayin Novotny thought he understood the manufacturing technology of magnetized materials.
Creating an external range-wide strong annihilation force field through magnetic interference can naturally be used to manufacture large-scale magnetized materials.
Wang Hao felt a little funny when he read the report, "Their ideas seem to be different from ours. When we create this cylindrical external magnetic field, what we think about is how to continue to extend it."
"And what they had in mind was... magnetized material manufacturing?"
He Yidao, "Maybe it's because of Annihilation Technology Company. Of course they hope to create high-strength magnetized materials."
"Right……"
Wang Hao nodded and said, "If they can increase the field force to more than 7 times, material manufacturing can indeed be achieved using this technology, and manufacturing first-order iron is not a problem."
"yes."
He Yi nodded and asked, "Will it have any impact on us? They are very close to discovering F-rays...if they go in the right direction."
Wang Hao was silent for a moment, shook his head and said, "This is beyond our control. Even if they do make a discovery, there is still a big technological gap with us."
"It's useless for us to worry about this."
A technology is likely to be discovered as long as it exists.
This is all normal.
What they have to do is to maintain their technological advantages and continue to research and improve so that they can always be in a leading position.
…
The impact of the new findings of the International Annihilation Theory Organization is still great.
To be continued...