The Pamiji Plateau is located in the southwest of Yongye Kingdom and is a bilateral area of communication with the Guman Kingdom. Because the average altitude is above 35oo meters, few people usually come and go. Except for some native primitive tribes, the Pamiji Plateau is indisputable.
Human forbidden zone.
But on this day, in the blue sky, a huge black shadow shining with crystal light passed by.
It was a strange object. It couldn't be said whether it was alive or dead. Its overall structure was a flat and huge transparent crystal. There were white threads in the crystal, which looked like ice... No, it should be said to be cold.
ice.
Because when a plateau eagle flew over a hundred meters away, it froze into an ice sculpture and fell down.
If it is ice, it must be a dead thing. But why is it misunderstood as a living thing? The reason is that this huge piece of ice, about 20 meters long, has equally transparent wide wings on both sides, and the style of the wings is similar to that of a swan.
Every time he flaps his wings, glittering ice feathers fall down.
The strong sunshine on the plateau illuminates this piece of ice with wings, making it crystal clear and shiny.
On top of the ice, several mysterious people in white robes were resting with their eyes closed. The endless freezing power of the ice did not seem to be able to harm them. On the contrary, in the dense white air, their figures became more and more ethereal.
If you look carefully, you will find that the backs of the white-robed men are all embroidered with a frozen crescent moon.
…
On the second and first day of the Month of Blossoms, Angel had been depressed for half a month. On this day, the consequences of the spell's backlash were finally lifted.
He almost immediately threw himself into practicing the art.
The first thing he learned was the basic techniques of epigraphy, the melting method and the condensation method. In his plan, there were two necessary conditions for him to climb to the top of the Sky Tower. One was alchemical weapons;
A complete set of defensive techniques.
Of these two prerequisites, learning the techniques should not be a problem, it just takes a while to apply them skillfully. But Angel is a little unsure about the production of alchemical weapons. After all, it is the product of the combination of two civilizations, and the future
Uncertain.
The most important thing is that Angel has no idea whether he can cross the threshold of the alchemy world. If he can't even become an alchemist apprentice, then all other plans are fantasy.
Therefore, Angel immediately focused all his attention on the thermal melting method.
The hot melt method is the first threshold for alchemy apprentices.
The essence of the thermal melting method is actually the long-term resistance between the fire element and the magic power, which generates extremely high heat. Then the range of the high heat is controlled through the magic model to prevent it from hurting oneself.
This trick is exactly the opposite of the tricks of the three major structures. The trick model is not to construct the thermal melt method, but to limit the high temperature of the thermal melt method.
Angel took out a piece of paper, which was densely written with data and formulas. This was the model result he derived for the thermal melt method when the spell backfired a few days ago.
After memorizing a few key coordinates of the model diagram, Angel closed his eyes and entered a meditative state.
The thinking space has returned to clarity, and the "lollipop" he constructed is alone in the chaos. The singularity is slowly turning, purifying the original magic power.
Angel didn't care about the singularity, but released pure magic power from the magic source and built a magic model of the melting magic.
With the positioning of the universal axis, the magic model was constructed in almost two to three seconds.
After the thermal melt magic trick model was constructed, there was no abnormality. It just hung in the thinking space without collapse or disintegration, and there was no urge to release it to the outside world.
Angel turned the magic model to his fingertips, but there was still no feeling or any trace of the magic.
"This model is indeed very different. It has not collapsed even if it has been suspended outside the body for a long time. It is as solid as a rock." Angel thought to himself.
Since the model couldn't see any problems, Angel simply started to "warm up" it.
The simple explanation of the combination of fire element and magic power is to release the magic power outside the body and rub it with the external fire element to combine.
This step does not seem difficult, and the magic power exported to the outside of the body is minimal, but the patience and control it requires are difficult for ordinary wizard apprentices to achieve.
The so-called patience means to continuously output magic power and slowly warm up. The time required for this process is determined by the content of the fire element in the air. In places where the fire element is active, the preheating time will only take a few minutes.
, but where the fire element is lazy, preheating may even take several hours, maybe more.
Basically, the patience step is not difficult for wizard apprentices.
But the control of the next step is the most difficult aspect of learning the thermal fusion method, and it is also one of the reasons why alchemy excludes most wizard apprentices.
During the preheating process, magic power must be continuously output from the body to the outside. Although the magic power is consumed very little, the same amount of magic power must be continuously released to the outside.
A little more, a little less, even a tiny bit, will lead to preheating failure.
Precise control of measurements is almost difficult for wizard apprentices to achieve.
…
Angel also started to warm up, and the magic power was continuously output from the body to the outside. When he first came into contact with the fire element, it was easy to endure it.
But after 2 seconds, the preheating failed. The reason was the same as other wizard apprentices, the measurement of magic power was not accurately controlled.
In the second test, Angel carefully released the magic power little by little. With his high concentration, he lasted this time for... 3 seconds.
Angel conducted the third, fourth... and tenth test. The highest record was to maintain the magic strength for 4 seconds. The others basically hovered for 2 seconds.
In places where the fire element is active, this kind of warm-up takes more than two minutes. But now he can't even break through 5 seconds.
Angel suddenly felt depressed. Didn't he have the talent to learn alchemy?
The magic power was almost exhausted at this time, and Angel was in a bad mood. He simply closed his eyes and restored the magic power through meditation.
In the blink of an eye, five hours passed.
During the meditation process, Angel's mood gradually calmed down.
He also wants to understand that it is normal to be hit, and nothing can be solved overnight. He will continue to try. If there is really no way to curb the power of magic, then it can only be said that he has no connection with alchemy.
At this time, the magic power in the magic source was abundant again. Angel took out the dry food and ate it while thinking about how to control the amount of magic power.
Controlling the measurement is definitely not something that can be done carefully. Angel previously focused almost all his attention on control, and it was difficult to achieve perfect control.
Angel thought: Manpower is always exhausted, can we borrow external help?
Speaking of external forces, the simplest way to control the measurement is through the pipe limit. Just like drinking water through a straw, the straw can effectively limit the water outflow measurement.
But it’s impossible for him to insert a tube into the thinking space. Besides, can magic power be put into a tube?
Pipelines...Limits...
Angel muttered repeatedly, and various pictures flashed in his mind. Suddenly, a picture full of dotted lines flashed through his mind.
"I thought of it! I can't insert a pipe, but I can make a pipe myself!" Angel's face flashed with excitement: "You can do it with the Vientiane Axis!"
The universal axis is the final expression of the thirty-six-bit spatial coordinate system positioning method.
The Vientiane Axis turns the thinking space into a collection of countless dotted lines, and each point can be transformed into a spatial coordinate point through the Vientiane Axis. Angel only needs to construct a three-dimensional channel in the thinking space, using the Vientiane Axis as the standard of measurement, and the magic output is
You can’t control it by measuring it!
Angel thought of this and immediately started experimenting excitedly.
It took half a day to create a passage determined by the Vientiane Axis, starting from the source of magic and connecting outward.
Angel took a deep breath and began to draw magic power from the magic source. He carefully paid attention not to let the amount of magic power spill out of the Vientiane Axis channel.
2 seconds, 3 seconds,...19 seconds, 2o seconds.
After 2o seconds, the preheating failed again.
However, Angel did not show a frustrated expression this time, because he was very sure that he had solved the measurement problem! The proof is from 4 seconds to 2o seconds!
The reason why he failed this time was not that the measurement was not well controlled, but that the rate fluctuated.
As long as the measurement problem is solved, other problems are minor.
It took some time, but with his constant attention, the rate issue was able to reach a basic balance.
After the measurement and rate were resolved, Angel started the preheating again.
2 seconds, 3 seconds,...19 seconds, 2o seconds...1 minute and 1o seconds...1 minute and 3o seconds...
At 2 minutes, Angel failed again.
However, the failure this time had nothing to do with technology, but...his fingers were burned.
He has been focusing on solving the preheating problem, but he has forgotten one thing. The preheating position must be within the magic model, otherwise, it will only be a matter of time before he is burned.
…
The third day of the second half of the month of flowers.
Angel moved the stove in the kitchen to the basement.
Light a fire.
The scalding heat wave slowly spreads in the basement.
Angel sat by the stove, closed his eyes and began to meditate. After about half an hour, Angel stretched out his spiritual tentacles and felt the activity of the fire element in the air.
——With the furnace as the center, the activity of the fire element is several times higher than before.
Angel felt that he was almost done, so he stood up and went to the pile of wooden boxes on the other side of the basement. These wooden boxes were filled with low-level materials purchased from Prome's alchemy shop.
Angel took out a black and red metal block from the wooden box.
This is Earth Demon Blood Copper, which is the most common material he buys. It is the lowest grade in the Blood Copper series, and is a copper mine that is stained with Earth Demon blood and has been cultivated for many years.
The hardness and wear resistance of items made with Earth Demon Blood Copper will be greatly improved, and there is a very small chance of obtaining special effects.
Angel took out the Earth Demon Blood Copper and returned to the stove.
Angel used the thermal melting method to build a magic model, and then output magic power to slowly combine with the fire element, and time passed bit by bit.
Fifteen minutes later, it was formed by hot melting!
Angel could feel the intense heat in the model at his fingertips. However, being restrained by the model, there was no sign of leakage.
Angel placed the Earth Demon Blood Copper in the thermal melting method.
As time goes by, the Earth Demon Blood Copper slowly shows signs of melting under the thermal melting method...