After lighting up the screen, countless consumers finally understood what the so-called "super-sensing screen" in the promotional video was. The 6.8-inch large curved screen coupled with ultra-high resolution made the visual effect very shocking.
For a curved screen with a large curvature like the one used by Stardust-Chenji, the left and right sides are equivalent to no borders, and the upper and lower sides are very narrow, only 1.89mm. It’s no wonder that the visual impression is not good...
In Chen Zifan's memory, later curved screens began to be abandoned by some groups due to various reasons, but it is undeniable that Samsung's initial curved screen solution did link curved screens with high-end.
Curved screens are indeed not easy to use in some aspects, but straight screens are not much better, and the production process and cost of curved screens are lower than those of straight screens of the same level. Note that they are straight screens of the same level.
However, the entire smartphone market is still in a "rapid growth period". Consumers do not have an intuitive judgment on the product and do not have a clear understanding of their own needs. They can only leave it to Stardust Technology.
By the time they react, it has become a mainstream concept that curved screens are higher-end than straight screens.
Of course, the most amazing thing is not the Xingchen-Chenji curved screen, but the transition from the curved screen to the inductive glass. With Chen Zifan's hand slightly sideways, the audience can clearly see the blurred transition.
Chen Zifan continued:
“Our original goal was just to use an inductive glass back cover with an improved process, but during the product development process, we found that if that was the case, the product would be too boring.
So we combined a stronger 'super-sensitive screen' and inductive glass into one, forming an effect similar to a surround screen. In fact, we have also achieved it. You can take a closer look at its edge transition...
It gradually blurs from fine high-resolution, then blurs again, until it evolves into a pixel-like effect, and its inductive glass back cover can also be adjusted through the APP. Let me demonstrate it to you~"
This thing is not new. I have used it in Stardust 2-Electrochromic Edition. You can start DIY by clicking on the personal homepage of your Stardust account. You can also find special functions in the settings and you can change them there.
The left and right virtual buttons will also make appropriate adjustments according to the different color changes of the inductive glass.
Similar things, such as breathing lights, marquee lights, ambient lights and other products, are obviously designed to enhance the sense of technology and experience, but if the lighting effect is not done well, it can easily feel cheap.
It's too "auto parts" when placed in a car, and too "plastic" when placed on a mobile phone. However, Stardust-Chenji doesn't feel this way at all. On the one hand, the color is fresh enough, and it won't look like it if you look at it for a long time.
greasy.
On the other hand, Chen Zifan added some "fluorescent" effects to the inductive glass, which lights up very beautifully in dark light scenes. Of course, if you don't like this design, you can also turn off the light effect manually.
In fact, it is equivalent to using a transparent color to make the entire inductive glass less colorful.
Stardust-Chenji is indeed amazing!
But soon the audience discovered a new problem:
"But...the whole phone is a screen, so how can I wear a phone case? What should I do if it gets fingerprints? It always feels a bit frivolous and useless..."
"right!"
"Will the screen look ugly if it is stained with oil or fingerprints? Is the inductive glass also ugly?"
"I feel like I'm overthinking it. Which mobile phone would not be ugly if there was a thick layer of fingerprints on the screen?"
"If it gets stained, just rinse it with water. Anyway, the Stardust mobile phone is waterproof, so even if it does get wet, it will be fine. During the warranty period, I will go to the after-sales service to replace it with a new one."
In fact, the people who asked this question are not the same type of people as the main user groups who buy Stardust-Chenji. To give a very simple example, many ordinary people do not buy BMWs. Is it because BMWs have a common problem of burning oil?
I actually bought a lot of them and didn’t care anymore…
Chen Zifan has nothing to do with BMW matters, but he still cares about the experience of using Xingchen-Chenji, and he has also done special processing in this regard:
"The screen of Stardust-Chenji has a layer of special tempered glass on the outside of the inductive glass. This layer of tempered glass is the same as that of Stardust 3+. The difference is that the tempered glass of Stardust-Chenji is formed in one piece.
The process difficulty will be higher!
And due to its surround-screen-like characteristics, we also used an anti-fingerprint coating on the surface of this tempered glass. Fingerprints and ordinary daily stains are very difficult to get on, just like now...
As you can see, I have been holding the Stardust-Chenji, and there are no traces of fingerprints on its surface. If it is used normally, it can be cleaned in 1 to 2 days, so there is no need to worry about this."
In fact, the oleophobic layer of most mobile phone screens can achieve similar effects, it just depends on the length of time. As soon as Chen Zifan explained, many viewers immediately breathed a sigh of relief, at least in terms of practicality, there is no problem.
Once the design and practicality issues are resolved, the next step is the general configuration introduction:
"We equipped Stardust-Chenji with a 6000mah battery inside. Its battery capacity is 33% larger than that of Stardust 3+, and we also equipped it with a 30W flash charge with more stable power..."
Originally, Stardust-Chenji's battery was not that big at all, but [Stardust Technology]'s sodium-lithium battery technology changed Chen Zifan's idea. After all, the shortcomings of pure lithium batteries are still too big, so it is better to transform and develop in advance.
Within the same battery volume, the energy density of sodium-lithium batteries, that is, the battery capacity, is larger than that of pure lithium batteries, and the cost of sodium is much lower than that of lithium, especially since the price of lithium ore has been rising recently.
Stardust New Energy's battery shipments are so large that they are used in mobile phones, computers, and new brands of trams. Even some traditional fuel vehicles are looking for customized batteries from Stardust New Energy. It is normal for the price of raw materials to increase.
The 30W fast charge with more stable power means that with the sodium-lithium battery, Stardust-Chenji can increase the power to 30W within 30 seconds of being connected to the charger, and can maintain the 30W power for a longer time.
Ordinary 4000mah lithium batteries and ordinary 30W fast charging take about 50 minutes to fully charge, while Stardust-Chenji's 30W fast charging with 6000mah sodium lithium battery only takes 40 minutes to fully charge.
In terms of speed, this is even faster than some future fast charges exceeding 60W. The reason is that it can maintain the maximum output power for a very long time.
And the charging and discharging efficiency of sodium-lithium batteries is higher!
As soon as the PPT was played behind Chen Zifan, the audience only needed to take a quick look to understand what was going on.
Stardust 3+ users never expected that Stardust 4 series mobile phones could be stabbed in the back even though they haven’t been released yet... It’s a bit painful! But they also gradually understand that electronic products are updated too fast every year.
Even so, they still have questions:
"That's not right! Didn't I say last time that the 30W fast charging of Stardust 3+ is the full-blooded version? How come the 30W fast charging of Stardust-Chenji can be taken to the next level?"
"The reason is to replace the battery?"
“Is the battery capacity of the new model increased?”
"What about our old models!"
Unfortunately, Chen Zifan has not responded to this issue for the time being, but he also has specific solutions. For all models under warranty, you can go to the Stardust after-sales center to replace the new battery, including Stardust 1.
But under normal circumstances, ordinary people will not purchase additional insurance when buying a mobile phone. This means that the mobile phone will be out of insurance after one year, and these consumers will need to pay a small amount of labor costs~
Of course, they can also choose to reduce the battery efficiency of the mobile phone to below 80%, or go to after-sales service to replace the battery for free, but it is too difficult.
With the level of Stardust New Energy's lithium battery, even if they plug in the charging cable and play games intensively for 12 hours a day, it will take nearly two years to complete.
When the time comes...
How many of them still need to replace the batteries?
Isn’t the new mobile phone delicious?
Moreover, even if a new sodium-lithium battery is replaced, the battery capacity will only increase by a few hundred mah at most.
Not as big as imagined.
It's just that the audience didn't know this, so Chen Zifan didn't say much and directly introduced the next item:
"This time Stardust-Chenji also has a very big breakthrough innovation, that is, we integrated the three cameras on Stardust 3+: main camera, telephoto, and ultra-wide angle, and equipped them with a brand new lens..."
They all understand the truth.
But there were also many photography enthusiasts in the audience. When they heard this, they were a little confused on the spot: